Sketcher Trimming

From FreeCAD Documentation
Revision as of 15:51, 26 February 2024 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher Trimming

Menu location
Sketch → Sketcher geometries → Trim edge
Workbenches
Sketcher
Default shortcut
G T
Introduced in version
0.12
See also
Sketcher Extend edge

Description

The Sketcher Trimming tool trims an edge at the nearest intersections with other edges. If the selected edge does not intersect other edges it will be deleted.

Usage

  1. There are several ways to invoke the tool:
    • Press the Trim edge button.
    • Select the Sketcher → Sketcher geometries → Trim edge option from the menu.
    • Right-click in the 3D view and select the Trim edge option from the context menu.
    • Use the keyboard shortcut: G then T.
  2. If there is a previous selection it is cleared. The tool does not accept a pre-selection.
  3. The cursor changes to a white cross with the tool icon.
  4. Move the cursor over the portion of the edge to be trimmed.
  5. The edge is highlighted and the trim points are marked with temporary circles.
  6. Click to confirm.
  7. The edge is trimmed at the marked points. If there are edges on both sides of the clicked position, the selected portion is cut out resulting in a new edge. Existing applicable constraints are transferred to the new edge. Point onto object constraints are added between the endpoints of the trimmed edges and the cutting edges.
  8. This tool always runs in continue mode: optionally keep trimming edges.
  9. Right-click or press Esc, or start a another constraints or geometries tool, to finish.