Sketcher CreateRectangle: Difference between revisions
(Marked this version for translation) |
mNo edit summary |
||
Line 45: | Line 45: | ||
#* Right-click in the [[3D_view|3D view]] and select the {{MenuCommand|[[Image:Sketcher_CreateRectangle.svg|16px]] Create rectangle}} option from the context menu. |
#* Right-click in the [[3D_view|3D view]] and select the {{MenuCommand|[[Image:Sketcher_CreateRectangle.svg|16px]] Create rectangle}} option from the context menu. |
||
#* Use the keyboard shortcut: {{KEY|G}} then {{KEY|R}}. |
#* Use the keyboard shortcut: {{KEY|G}} then {{KEY|R}}. |
||
# The cursor changes to a |
# The cursor changes to a cross with the current tool mode icon. |
||
# The '''Rectangle parameters''' section ({{Version|0.22}}) is added at the top of the [[Sketcher_Dialog|Sketcher Dialog]]. |
# The '''Rectangle parameters''' section ({{Version|0.22}}) is added at the top of the [[Sketcher_Dialog|Sketcher Dialog]]. |
||
# Optionally press the {{KEY|U}} key or check the '''Rounded corners''' checkbox to apply fillets to the rectangle. {{Version|0.22}} |
# Optionally press the {{KEY|U}} key or check the '''Rounded corners''' checkbox to apply fillets to the rectangle. {{Version|0.22}} |
Revision as of 09:28, 18 April 2024
Sketcher CreateRectangle |
Menu location |
---|
Sketch → Sketcher geometries → Create rectangle |
Workbenches |
Sketcher |
Default shortcut |
G R |
Introduced in version |
- |
See also |
Sketcher CreatePolyline |
Description
The Sketcher CreateRectangle tool creates a rectangle. introduced in version 0.22: The tool has four modes, two of which can also produce parallelograms. Rounded corners and creating an offset copy are optional features.
Usage
See also: Drawing aids.
Pos-OVP = Positional On-View-Parameters. introduced in version 0.22
Dim-OVP = Dimensional On-View-Parameters. introduced in version 0.22
- There are several ways to invoke the tool:
- The cursor changes to a cross with the current tool mode icon.
- The Rectangle parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
- Optionally press the U key or check the Rounded corners checkbox to apply fillets to the rectangle. introduced in version 0.22
- Optionally press the J key or check the Frame checkbox to create a second offset shape. introduced in version 0.22
- Optionally press the M key or select from the dropdown list in the parameters section to change the tool mode:
- Corner, width, height:
- Pick the first corner of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick the opposite corner of the rectangle. Or with Dim-OVP: enter the width and/or height of the rectangle.
- Center, width, height: introduced in version 0.22
- Pick the center of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick a corner of the rectangle. Or with Dim-OVP: enter the width and/or height of the rectangle.
- 3 corners: introduced in version 0.22
- Pick the first corner of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick the endpoint of the first edge of the rectangle. Or with Dim-OVP: enter the length and/or angle of the first edge. The angle is relative to the X axis of the sketch.
- Pick the third corner, opposite the first, of the rectangle. Or with Dim-OVP: enter the length and/or angle of the second edge. The angle is relative to the first edge. Only if this angle is 90° will the result be a rectangle.
- Center, 2 corners: introduced in version 0.22
- Pick the center of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick the first corner of the rectangle. Or with Pos-OVP: enter its X and/or Y coordinate.
- Pick the second corner of the rectangle. Or with Dim-OVP: enter the length and/or angle of the edge between the first and the second corner. The angle is relative to the other edge connected to the first corner. Only if this angle is 90° will the result be a rectangle.
- Corner, width, height:
- If Rounded corners is selected: Pick a point to define the fillet radius. Or with Dim-OVP: enter it.
- If Frame is selected: Pick a point to define the offset distance. Or with Dim-OVP: enter it. If the offset is inward and larger than the radius, the offset shape will not have fillets.
- The geometry is created and applicable Pos-OVP and Dim-OVP based constraints are added.
- If the tool runs in continue mode:
- Optionally keep creating rectangles.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.
Sketcher
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub