Sketcher CreateArc

From FreeCAD Documentation
Revision as of 16:35, 12 February 2024 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher CreateArc

Menu location
Sketch → Sketcher geometries → Create arc by center
Workbenches
Sketcher
Default shortcut
G A
Introduced in version
-
See also
Sketcher Circle

Description

The Sketcher CreateArc tool creates an arc by its center and its endpoints. introduced in version 0.22: Or optionally by its endpoints and a point along the arc.

Arc created in Center mode with automatically applied constraints defined by entering all On-View-Parameters

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters. introduced in version 0.22
Dim-OVP = Dimensional On-View-Parameters. introduced in version 0.22

  1. There are several ways to invoke the tool:
    • Press the Center and end points button.
    • Select the Sketcher → Sketcher geometries → Create arc by center option from the menu.
    • Right-click in the 3D view and select the Create arc by center option from the context menu.
    • Use the keyboard shortcut: G then A.
  2. The cursor changes to a white cross with the current tool mode icon.
  3. The Arc parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
  4. Optionally press the M key or select from the dropdown list in the parameters section to change the tool Mode:
    • Center:
      1. Pick the center of the arc. Or with Pos-OVP: enter its X and/or Y coordinate.
      2. Pick the start point of the arc, this also defines the radius. Or with Dim-OVP: enter the radius and/or start angle of the arc. The angle is relative to the X axis of the sketch.
      3. Pick the end point of the arc. Or with Dim-OVP: enter the aperture angle of the arc.
    • 3 rim points: introduced in version 0.22
      1. Pick the start and end points of the arc. Or with Pos-OVP: enter their X and/or Y coordinates.
      2. Pick another point to define the radius.
  5. The arc is created and applicable Pos-OVP and Dim-OVP based constraints are added.