Sketcher ConstrainVertical: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 47: Line 47:
===Once-only mode===
===Once-only mode===


see [[Sketcher_ConstrainHorizontal#Once-only_mode|Sketcher ConstrainHorizontal]].
See [[Sketcher_ConstrainHorizontal#Once-only_mode|Sketcher ConstrainHorizontal]].


==Scripting== <!--T:10-->
==Scripting== <!--T:10-->

Revision as of 14:28, 7 March 2024

This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher ConstrainVertical

Menu location
Sketch → Sketcher constraints → Constrain vertically
Workbenches
Sketcher
Default shortcut
V
Introduced in version
-
See also
Sketcher ConstrainHorVer, Sketcher ConstraintHorizontal

Description

The Sketcher ConstrainVertical tool constrains lines or pairs of points to be vertical (parallel to the vertical axis of the sketch).

introduced in version 0.22: In most cases it is advisable to use the combined Sketcher ConstrainHorVer tool instead.

Usage

See also: Drawing aids.

Continue mode

  1. Make sure there is no selection.
  2. There are several ways to invoke the tool:
    • introduced in version 0.22: If the Auto tool for Horizontal/Vertical option is selected (default) in the Sketcher Preferences: Press the down arrow to the right of the button and select the Constrain vertically option.
    • If this preference is not selected (and in version 0.21 and below): Press the Constrain vertically button.
    • Select the Sketch → Sketcher constraints → Constrain vertically option from the menu.
    • Use the keyboard shortcut: V.
  3. For further steps see Sketcher ConstrainHorizontal.

Once-only mode

See Sketcher ConstrainHorizontal.

Scripting

See Sketcher ConstraintHorizontal.