Sketcher ConstrainTangent

From FreeCAD Documentation
Revision as of 19:42, 6 March 2024 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher ConstrainTangent

Menu location
Sketch → Sketcher constraints → Constrain tangent
Workbenches
Sketcher
Default shortcut
T
Introduced in version
-
See also
Sketcher Constraint point on object

Description

The Sketcher ConstrainTangent tool constrains two edges, or an edge and an axis, to be tangent. Lines are treated as infinite, and arcs are treated as full circles/ellipses. The constraint can also connect two edges, forcing them to be tangent at the joint. If two lines are selected, or a line and the endpoint of another line, the lines are made collinear.

Usage

See also: Drawing aids.

  1. Do one of the following (optional if the tool will run in continue mode):
    • Select two edges. The edges can be any edge except a B-spline.
    • Select two endpoints belonging to different edges.
    • Select an edge and the endpoint of another edge (in any order).
    • Select a point and two edges (idem).
  2. There are several ways to invoke the tool:
    • Press the Constrain tangent button.
    • Select the Sketch → Sketcher constraints → Constrain tangent option from the menu.
    • introduced in version 0.22: Right-click in the 3D view and select the Constrain → Constrain tangent option from the context menu.
    • Use the keyboard shortcut: T.
  3. If the tool runs in continue mode:
    1. The cursor changes to a white cross with the tool icon.
    2. Optionally keep selecting elements:
      • Select two edges (see above).
      • Select a point and two edges (in that order).
      • Select an edge, a point and another edge (idem).
    3. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Examples

Between two edges (direct tangency)

The two edges are made tangent. If one of the edges is a conic, a point object that has a point onto object constraint with both edges is added.

It is not recommended to reconstruct the point of tangency by manually creating a point and constraining it to lie on both curves. It will work, but the convergence will be seriously slower, jumpier, and will require about twice as many iterations to converge than normal. If the point of tangency is needed, select two edges and an existing point instead.

Between two endpoints (point-to-point tangency)

The endpoints are made coincident, and the angle between the edges at that point is set to 180° (smooth joint) or 0° (sharp joint), depending on the placement of the edges before the constraint is applied.

Between edge and endpoint (point-to-edge tangency)

The endpoint of one edge is constrained to lie on the other edge, and the edges are made tangent at that point.

Between two edges at point (tangent-via-point)

The two edges are made tangent at a given point. The point can be any point, e.g. the center of a circle, the endpoint of an edge, or the origin, it can belong to one of the edges, and it can also be a point object. If required point onto object constraint(s) are added to ensure the point lies on both edges.

Compared to direct tangency, this constraint is slower, because there are more degrees of freedom involved, but if the point of tangency is needed, it is recommended because it offers better convergence.

Between two lines (collinear)

The two lines are made collinear.

Scripting

Tangent Constraint can be created from macros and from the Python console by using the following:

# direct tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,icurve2))

# point-to-point tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,pointpos1,icurve2,pointpos2))

# point-to-curve tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,pointpos1,icurve2))

# tangent-via-point (plain constraint, helpers are not added automatically)
Sketch.addConstraint(Sketcher.Constraint('TangentViaPoint',icurve1,icurve2,geoidpoint,pointpos))

where:

  • Sketch is a sketch object
  • icurve1, icurve2 are two integers identifying the curves to be made tangent. The integers are indexes in the sketch (the value, returned by Sketch.addGeometry).
  • pointpos1, pointpos2 should be 1 for start point and 2 for end point.
  • geoidpoint and pointpos in TangentViaPoint are the indexes specifying the point of tangency.

The Sketcher scripting page explains the values which can be used for incurve1, incurve2, pointpos1, pointpos2, geoidpoint and pointpos and contains further examples on how to create constraints from Python scripts.