# Sketcher ConstrainTangent

Sketcher ConstrainTangent |

Umístění Menu |
---|

Sketch → Sketcher constraints → Constrain tangent |

Pracovní stoly |

Sketcher |

Výchozí zástupce |

T |

Představen ve verzi |

- |

Viz také |

Constraint point on object |

## Description

The Sketcher ConstrainTangent tool constrains two edges, or an edge and an axis, to be tangent. Lines are treated as infinite, and open curves are virtually extended as well. The constraint can also connect two edges, forcing them to be tangent at the joint. If two lines are selected, or a line and the endpoint of another line, the lines are made collinear.

## Usage

See also: Drawing aids.

### Continue mode

- Make sure there is no selection.
- There are several ways to invoke the tool:
- Press the Constrain tangent or collinear button.
- Select the
**Sketch → Sketcher constraints → Constrain tangent or collinear**option from the menu. - introduced in version 1.0: Right-click in the 3D view and select the
**Constrain → Constrain tangent or collinear**option from the context menu. - Use the keyboard shortcut: T.

- The cursor changes to a cross with the tool icon.
- Do one of the following:
- Select two edges. The edges can be any edge except a B-spline.
- Select a point and two edges (in that order).
- Select an edge, a point and another edge (idem).

- A Tangent constraint is added. If a point and two edges have been selected, up to two Point on object constraints can also be added. See Examples.
- Optionally keep creating constraints.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.

### Run-once mode

- Do one of the following:
- Select two edges (see above).
- Select two endpoints belonging to different edges.
- Select an edge and the endpoint of another edge (in any order).
- Select a point and two edges (idem).

- Invoke the tool as explained above, or with the following additional option:
- introduced in version 1.0: Right-click in the 3D view and select the
**Constrain tangent or collinear**option from the context menu.

- introduced in version 1.0: Right-click in the 3D view and select the
- A Tangent constraint is added. If a point and two edges have been selected, up to two Point on object constraints can also be added. See Examples.

## Examples

### Between two edges

The two edges are made tangent. If one of the edges is a conic, a Point object that has a Point on object constraint with both (extended) edges is added.

It is not recommended to reconstruct the point of tangency by manually creating a point and constraining it to lie on both curves. It will work, but the convergence will be seriously slower, jumpier, and will require about twice as many iterations to converge than normal. If the point of tangency is needed, select two edges and an existing point instead.

### Between two endpoints

The endpoints are made coincident, and the angle between the edges at that point is set to 180° (smooth joint) or 0° (sharp joint), depending on the placement of the edges before the constraint is applied.

### Between edge and endpoint

The endpoint of one edge is constrained to lie on the other edge, and the edges are made tangent at that point.

### Between two edges at point

The two edges are made tangent at a given point. The point can be any point, e.g. the center of a circle, the endpoint of an edge, or the origin, it can belong to one of the edges, and it can also be a Point object. If required Point on object constraint(s) are added to ensure the point lies on both (extended) edges. These additional constraints are called helper constraints.

Compared to direct tangency, this constraint is slower, because there are more degrees of freedom involved, but if the point of tangency is needed, it is recommended because it offers better convergence.

### Between two lines

The two lines are made collinear.

## Scripting

Tangent Constraint can be created from macros and from the Python console by using the following:

```
# direct tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,icurve2))
# point-to-point tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,pointpos1,icurve2,pointpos2))
# point-to-curve tangency
Sketch.addConstraint(Sketcher.Constraint('Tangent',icurve1,pointpos1,icurve2))
# tangent-via-point (plain constraint, helpers are not added automatically)
Sketch.addConstraint(Sketcher.Constraint('TangentViaPoint',icurve1,icurve2,geoidpoint,pointpos))
```

where:

`Sketch`

is a sketch object`icurve1`

,`icurve2`

are two integers identifying the curves to be made tangent. The integers are indices in the sketch (the values, returned by`Sketch.addGeometry`

).`pointpos1`

,`pointpos2`

should be`1`

for start point and`2`

for end point.`geoidpoint`

and`pointpos`

in`TangentViaPoint`

are the indices specifying the point of tangency.

The Sketcher scripting page explains the values which can be used for `incurve1`

, `incurve2`

, `pointpos1`

, `pointpos2`

, `geoidpoint`

and `pointpos`

and contains further examples on how to create constraints from Python scripts.

**General:**Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation

**Sketcher geometries:**Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry

**Sketcher constraints:****Dimensional constraints:**Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock**Geometric constraints:**Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block**Other constraints:**Refraction (Snell's law)**Constraint tools:**Toggle driving/reference constraint, Activate/deactivate constraint

**Sketcher tools:**Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints

**Sketcher B-spline tools:**Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves

**Sketcher visual:**Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space

**Additional:**Sketcher Dialog, Preferences, Sketcher scripting

**Getting started****Installation:**Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap**Basics:**About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

**Help:**Tutorials, Video tutorials**Workbenches:**Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

**Hubs:**User hub, Power users hub, Developer hub