Part CrossSections/ru: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
m (FuzzyBot moved page Part SectionCross/ru to Part CrossSections/ru without leaving a redirect: Part of translatable page "Part SectionCross")
(No difference)

Revision as of 10:03, 9 December 2020

Поперечные сечения

Системное название
Part SectionCross
Расположение в меню
Деталь → Поперечные сечения
Верстаки
Part,Complete
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Description

The Cross-sections utility creates one or more cross-sections through the selected shape.

Usage

  1. Select a shape.
  2. Press the Cross-sections button.
  3. Define the guiding plane.
  4. Define the position (height of the cross-section).
  5. Optionally, check Sections to create more than one cross-section:
    • Checking On both sides will distribute the cross-sections on each side of the guiding plane location.
    • Set the count.
  6. Press OK.

Limitations

  • The resulting object is not parametric, that is it is not linked to the original shape.
  • A single object is created, even with more than one cross-section.

Example

Select an object

Dialog window

Result