PartDesign Workbench/it: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 11: Line 11:
La prima funzione è chiamata comunemente '''funzione di base'''. Quando si aggiungono ulteriori funzioni al modello, ogni funzione prende la forma precedente e vi aggiunge o rimuove del materiale, creando delle dipendenze lineari tra una funzione e quella successiva. In effetti, questa metodologia simula un comune processo di produzione: un blocco viene tagliato su un lato, quindi su un altro lato, vengono aggiunti dei fori, poi dei raccordi, ecc.
La prima funzione è chiamata comunemente '''funzione di base'''. Quando si aggiungono ulteriori funzioni al modello, ogni funzione prende la forma precedente e vi aggiunge o rimuove del materiale, creando delle dipendenze lineari tra una funzione e quella successiva. In effetti, questa metodologia simula un comune processo di produzione: un blocco viene tagliato su un lato, quindi su un altro lato, vengono aggiunti dei fori, poi dei raccordi, ecc.


Tutte le funzioni sono elencate in sequenza nell'albero del modello e possono essere modificate in qualsiasi momento. L'ultima funzione che è situata nella parte inferiore rappresenta la parte finale.
<div class="mw-translate-fuzzy">
L'ambiente Part Design ha lo scopo di creare un '''unico solido''' collegato. I '''solidi multipli''' (composti da più solidi) sono possibili con l'ambiente di lavoro [[Assembly Workbench/it|Assemblaggio]] (per ora vedere il [[Assembly_project/it|Progetto di Assemblaggio]] nel piano di sviluppo).
</div>


<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">

Revision as of 21:05, 9 March 2018

Con l'imminente rilascio di FreeCAD versione 0.17, l'ambiente PartDesign beneficia di importanti cambiamenti. Questa documentazione riflette questa nuova versione. Gli utenti di FreeCAD 0.16, possono fare riferimento alla pagina PartDesign Vecchia versione.

Part Design è l'ambiente per la costruzione di oggetti Parte basati su disegni 2D che mette a disposizione gli strumenti per modellare parti solide complesse e si basa sulla metodologia delle funzioni editabili. Questo ambiente è strettamente connesso con l'ambiente Sketcher che è l'ambiente per gli schizzi di base.

Concetti di base

Metodologia delle funzioni editabili

Mentre l'ambiente Part e altri ambienti di FreeCAD costruiscono i modelli combinando insieme delle forme, l'ambiente PartDesign usa le funzioni (features). Una feature è un'operazione che modifica la forma di un modello.

La prima funzione è chiamata comunemente funzione di base. Quando si aggiungono ulteriori funzioni al modello, ogni funzione prende la forma precedente e vi aggiunge o rimuove del materiale, creando delle dipendenze lineari tra una funzione e quella successiva. In effetti, questa metodologia simula un comune processo di produzione: un blocco viene tagliato su un lato, quindi su un altro lato, vengono aggiunti dei fori, poi dei raccordi, ecc.

Tutte le funzioni sono elencate in sequenza nell'albero del modello e possono essere modificate in qualsiasi momento. L'ultima funzione che è situata nella parte inferiore rappresenta la parte finale.

Gli strumenti

Gli strumenti si trovano nel menu Part Design che appare quando si carica questo modulo.

Essi comprendono anche gli strumenti dell'ambiente Sketcher, dato che il modulo Part Design dipende da esso.

Gli strumenti di Schizzo

Gli strumenti di Part Design

Extra

Corpo

Un Corpo di PartDesign contiene una serie di schizzi, riferimenti (datum) e caratteristiche (feature) di PartDesign che formano un singolo solido contiguo.

Un unico solido contiguo è un elemento simile a una fusione od a qualcosa di ricavato da un unico blocco di metallo. Se l'elemento coinvolge chiodi, viti, colla o saldature, non è un unico solido contiguo. Come esempio pratico, PartDesign non dovrebbe essere utilizzato per modellare una sedia di legno, ma può essere utilizzato per modellare i suoi sotto-componenti (gambe, doghe, sedile, ecc).

Gestione della visibilità del corpo

Quando si crea un modello nell'ambiente Part Design, ogni nuova funzione prende l'ultima forma e vi aggiunge o rimuove qualcosa, creando delle dipendenze lineari di funzione in funzione, passo dopo passo, così come viene creato il modello. Quindi una funzione "Cut" non è composta solo dal foro, ma è formata da tutta la parte prodotta fino a quel momento, compreso il foro. Quando al modello viene aggiunta una nuova funzionalità, FreeCAD disattiva la visibilità delle precedenti funzioni. Per questo motivo l'utente, di solito, deve avere visibile nell'albero del modello solo la voce (funzione) più recente, perché altrimenti le fasi del modello si sovrappongono tra di loro, ed i fori sono riempiti dalle precedenti funzioni del modello che non possiedono ancora i fori.

Per attivare o disattivare la visibilità di un oggetto, selezionarlo nella struttura gerarchica e premere la barra spaziatrice. Di solito tutto, tranne l'ultima voce della struttura gerarchica dovrebbe essere grigio e quindi non visibile nella vista 3D.

Un unico solido contiguo è un elemento simile a una fusione od a qualcosa di ricavato da un unico blocco di metallo. Se l'elemento coinvolge chiodi, viti, colla o saldature, non è un unico solido contiguo. Come esempio pratico, PartDesign non dovrebbe essere utilizzato per modellare una sedia di legno, ma può essere utilizzato per modellare i suoi sotto-componenti (gambe, doghe, sedile, ecc). I sotto-componenti sono associati con gli ambienti Assembly, Part o Draft.

It is possible to temporarily redefine the tip to a feature in the middle of the Body tree to insert new objects (features, sketches or datum geometry). It is also possible to reorder features under a Body, or to move them to a different Body. Select the object and right-click to get a contextual menu that will offer both options. The operation may be prevented if the object has dependencies in the source Body, such as being attached to a face. To move a sketch to another Body, it should not contain links to external geometry.

Datum Geometry

Datum geometry consists of custom planes, lines, points or externally linked shapes. They can be created for use as reference by sketches and features. There is a multitude of attachment possibilities for datums.

Cross-referencing

It is possible to cross-reference elements from a body in another body via datums. For example the datum shape binder allows to copy over faces from a body as reference in another one. This should make it easy to build a box with fitting cover in two different bodies. FreeCAD helps you to not accidentally link to other bodies and queries your intent.

Attachment

Object attachment is not a specific PartDesign tool, but rather a Part utility introduced in v0.17 that can be found in the Part menu. It is heavily used in the PartDesign workbench to attach sketches and reference geometry to the standard planes and axes of the Body. Very extensive ways of creating datum points, lines and planes are available. Optional attachment offset parameters make this tool very versatile.

More info can be found in the Attachment page.

Advice for creating stable models

The idea of parametric modeling implies that you can change the values of certain parameters and subsequent steps are changed according to the new values. However, when severe changes are made, the model can break. Compared to previous FreeCAD versions breaking can be minimized when you respect the following design principles:

  • Basically, you need to stop mapping sketches to faces - entirely! Place your sketches on standard planes, or on custom datum planes.
  • When creating datum geometry, do not base it on the part topology, base it on standard planes/axes and/or sketches.
  • Use a "master sketch". That is a preferably not too complicated sketch which contains basic geometric elements of your model. These elements can be referenced when modeling subsequent features. Such a master sketch will often be the first sketch in the Body but it doesn't have to be; in fact you don't even have to use it at all for anything else but being referenced.
  • If you inevitably have to reference an intermediate feature, e.g. the result of a thickness operation, use the first reference possible in the list of subsequent features where the referenced geometric element occurs. From FreeCAD 0.17 on you don't have to use the latest feature. If you take an early feature as reference, all changes to intermediate steps won't break your model.

The Tools

The Part Design tools are all located in the Part Design menu and the PartDesign toolbar that appear when you load the Part Design workbench.

Template:Structure Tools

Part Design Helper tools

  • Create body: Creates a Body in the active document and makes it active.
  • Create sketch: creates‎ a new sketch on a selected face or plane. If no face is selected while this tool is executed, the user is prompted to select a plane from the Tasks panel. The interface then switches to the Sketcher_Workbench in sketch editing mode.
  • Map sketch to face: Maps a sketch to a previously selected plane or a face of the active body.

Part Design Modeling tools

Datum tools

Additive tools

These are tools for creating base features or adding material to an existing solid body.

  • Pad: extrudes a solid from a selected sketch.
  • Revolution: creates a solid by revolving a sketch around an axis. The sketch must form a closed profile.
  • Additive loft: creates a solid by making a transition between two or more sketches.
  • Additive pipe: creates a solid by sweeping one or more sketches along an open or closed path.

Subtractive tools

These are tools for subtracting material from an existing body.

  • Pocket: creates a pocket from a selected sketch.
  • Hole: creates a hole feature from a selected sketch. The sketch must contain one or multiple circles.
  • Groove: creates a groove by revolving a sketch around an axis.
  • Subtractive loft: creates a solid shape by making a transition between two or more sketches and subtracts it from the active body.
  • Subtractive pipe: creates a solid shape by sweeping one or more sketches along an open or closed path and subtracts it from the active body.

Transformation tools

These are tools for transforming existing features. They will allow you to choose which features to transform.

  • Mirrored: mirrors one or more features on a plane or face.
  • Linear Pattern: creates a linear pattern based on one or more features.

Dress-up tools

These tools apply a treatment to the selected edges or faces.

  • Fillet: fillets (rounds) edges of the active body.
  • Chamfer: chamfers edges of the active body.
  • Draft: applies and angular draft to faces of the active body.
  • Thickness: creates a thick shell from the active body and opens selected face(s).

Boolean

  • Boolean operation: imports one or more Bodies or PartDesign Clones into the active body and applies a Boolean operation.

Extras

Some additional functionality found in the Part Design menu:

  • Migrate: migrates files created with older FreeCAD versions. If the file is pure PartDesign feature-based, migration should succeed. If the file contains mixed Part/Part Design/Draft objects, the conversion will most likely fail.
  • Shaft design wizard: Generates a shaft from a table of values and allows to analyze forces and moments. The shaft is made with a revolved sketch that can be edited.
  • Involute gear: creates an involute gear profile that can be used by a Pad.

Contextual Menu tools

  • Set tip: redefines the tip, which is the feature exposed outside of the Body.
  • Move object after other object: allows reordering of the Body tree by moving the selected sketch, datum geometry or feature after another object in the Body.

Tutorial

I seguenti tutorial sono eseguibili solo con una versione di sviluppo di FreeCAD che attualmente non è disponibile come binario o come installer:

Links


Part Workbench
Path Workbench