Measurement Of Angles On Holes: Difference between revisions

From FreeCAD Documentation
(Marked this version for translation)
m (some grammar + added TD link)
Line 14: Line 14:


<!--T:6-->
<!--T:6-->
This tutorial explains how to create center hole lines in TechDraw with oriented holes.
This tutorial explains how to create center hole lines using the [[Image:Workbench_TechDraw.svg|24px|TechDraw_Workbench]] [[TechDraw Workbench]] with oriented holes.


<!--T:2-->
<!--T:2-->
By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are necessary for creating.
By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are created for this necessity.


== Proceeding: == <!--T:3-->
== Proceeding: == <!--T:3-->

Revision as of 02:44, 9 April 2020

Tutorial
Topic
TechDraw
Level
Base
Time to complete
1 minute
Authors
AnHi
FreeCAD version
0.19
Example files
None
See also
None

Introduction

This tutorial explains how to create center hole lines using the TechDraw_Workbench TechDraw Workbench with oriented holes.

By creating angles for holes it's not possible to use vertical or horizontal center lines (false/true) from the properties of the view. Helping lines and/or helping points are created for this necessity.

Proceeding:

1.Setting center lines on holes:

There are some possibilities to create a center line for holes. At first the lines or points on the hole must be selected as shown below. Behind them the tool File:AnHi4.PNG or File:AnHi6.PNG from the tool bar is creating the center line.

File:AnHi3.PNG
create center line by point - point
File:AnHi5.PNG
create center line by line - line

Template:Tutorials navi