Draft Snap Near

From FreeCAD Documentation
Revision as of 18:50, 31 July 2021 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Draft Snap Near

Menu location
None
Workbenches
Draft, Arch
Default shortcut
None
Introduced in version
-
See also
Draft Snap, Draft Snap Lock

Description

The Draft Snap Near option snaps to the nearest point on faces or edges. The faces and edges can belong to Draft or Arch objects but also to objects created with other workbenches.

Snapping the second point of a line to the edge of a rectangle

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Near is not active do one of the following:
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the pointer over a face or edge.
  6. The face or edge is highlighted.
  7. If a nearest point is found the point is marked and the icon is displayed near the pointer.
  8. Optionally move the pointer along the face or edge to select a different nearest point.
  9. Click to confirm the point.

Notes

  • It is not a good idea to have Draft Snap Near permanently active as it makes using several other snap options almost impossible.

Preferences

See Draft Snap.