Advanced TechDraw Tutorial

From FreeCAD Documentation
Revision as of 14:45, 22 January 2021 by Maker (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.
Tutorial
Topic
Modeling
Level
Experienced User
Time to complete
Authors
domad
FreeCAD version
0.19.23300 or higher
Example files
See also
None

Introduction

This tutorial introduces the experienced user to some advanced use of existing tools and techniques in the Technical Drawing (= TechDraw) Workbench. This tutorial is not a complete and comprehensive guide to the TechDraw Workbench and many of the tools and capabilities are not covered. It should contribute to overcome the difficulties that are encountered in quoting and enriching the technical drawing using TechDraw. This tutorial will take advanced users through the steps needed to produce challenging technical drawings of the part from the Basic Part Design Tutorial using drawing tools of the "Draft" WB (lines, polylines, circumferences, arcs, splines, beziers, etc.), in particular, the snaps, to create, on the object, effectively precise "cosmetic points" that could then be used for dimensioning in TechDraw.

Before You Begin

The Task

Notes

Links


Template:Tutorials navi