Sketcher "Внешняя геометрия"
Внешняя Геометрия |
Системное название |
---|
Sketcher External |
Расположение в меню |
Эскиз → Геометрия эскиза → Внешняя Геометрия |
Верстаки |
Sketcher |
Быстрые клавиши |
X |
Представлено в версии |
- |
См. также |
Вспомогательная Геометрия |
Описание
Используйте инструмент Внешняя Геометрия, когда вам нужно применить ограничение между геометрией эскиза и чем-то вне эскиза. Это работает путем вставки связанной вспомогательной геометрии в эскиз. По умолчанию цвет связанной внешней геометрии пурпурный. Как и в случае стандартной несвязанной вспомогательной геометрии (синего цвета), связанная внешняя геометрия видна только тогда, когда эскиз находится в режиме редактирования, и напрямую не используется в последующих результатах использования эскиза другими инструментами. Оба типа вспомогательной геометрии могут использоваться в качестве ссылок для ограничений в эскизе.
Как использовать
- Создайте новый эскиз или откройте существующий эскиз.
- Нажмите кнопку 'Внешняя Геометрия'.
- Выберите ребро или вершину, которую вы хотите связать с эскизом.
- Нажмите Esc, или выберите другой инструмент, чтобы прекратить импорт геометрии в эскиз.
Правила выбора
Правила выбора объектов, которые можно импортировать, существенно различаются между версиями FC v0.16 и FC v0.17.
v0.17
- Допускаются только ребра и вершины объектов из одной системы координат.
То есть эскиз и объект должны находиться в одном и том же теле, или в одной и той же детали, или оба за пределами детали или тела.
Например, если открытый эскиз находится в теле, вы можете использовать другой эскиз из тела в качестве внешней геометрии, но вы не можете использовать эскиз из Body001, или ребро из Детали Куба в корне проекта. Используйте функцию Shapebinder, чтобы ввести копию объекта в систему координат открытого эскиза. Тогда вы сможете использовать ребра/вершины объекта Shapebinder.
- Круговые зависимости не допускаются.
Это означает, что вы не можете ссылаться на Вырез, созданный с помощью этого же эскиза. Вы не можете ссылаться на любой объект, который зависит от того же эскиза.
В отличии в версии FC v0.16, эскизу не обязательно быть на любой грани, чтобы использовать этот инструмент. Ссылки непосредственно между эскизами возможны и поощряются, так как они более надежны.
v0.16 and older
- You can only link to edges/vertices of the shape the sketch is mapped to.
For example. If Sketch was made on a face of Pad, you can only use edges/vertices of Pad. You can't use edges of Sketch that was used to make Pad. You can't use edges of Pad that are inherited onto a Pocket done with this sketch (you need to hide Pocket and unhide Pad to link new stuff in).
The sketch MUST be mapped to a face in order to use this tool.
Appearance When Successfully Linked
A (default magenta) coloured line will be overlaid when an edge is successfully linked (the vertices will be red), and will be visible in your sketch only while your sketch is in edit mode.
Similarity to Construction Lines
External geometry (default colour magenta) lines are similar (default colour blue) Contruction lines except in that the external geometry magenta lines are parametrically linked back to an element of the solid to which the sketch is mapped. Construction geometry are lines that are internal to the sketch, are only visible when the sketch is in edit mode and will be used for constraint references only, and not directly for later solid operations, like Pad or Pocket.
Use Of External Geometry in a PartDesign Workbench Work Flow
In the PartDesign workbench work flow, the External Geometry tool is used to assist in the positioning of an aspect of the solid you are constructing, relative to the previous stage in its construction. PartDesign workbench is intended to produce one single solid, therefore these sketches with external geometry are used to create a new feature of that one single solid.
The external geometry can, for example, be used as a reference for a constraint being used to position a hole in an object at a specific location relative to an edge or vertex.
Use Of External Geometry in a Part Workbench Work Flow
You can use any Part geometry that is in coordinate system of the sketch. It is advised to link to the earliest feature possible, as it forms a more stable link.
In v0.16 and older, the sketch must be mapped to a face to use this tool. Since v0.17, this limitation was lifted.
Example
This, below, is a sketch mapped to the top face of a solid created from a Pad of a previous sketch. The magenta lines are External Geometry linked to two edges of this pre-existing Pad.
In this case they are used as a reference for tangency constraints with the circumferences of one circle. They are also used as the reference for a horizontal and a vertical constraint to locate the centre of the second circle relative to the end and top of the Pad.
This is the same sketch in edit mode, with the Pad upon which it is mapped hidden.
When the sketch edit mode is closed, external Geometry lines are not visible.
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub