Sketcher "Выделить избыточные ограничения"

From FreeCAD Documentation
This page is a translated version of the page Sketcher SelectRedundantConstraints and the translation is 17% complete.
Outdated translations are marked like this.

Выделить избыточные ограничения

Системное название
Sketcher_SelectRedundantConstraints
Расположение в меню
Sketch → Инструменты для эскиза → Выделить избыточные ограничения
Верстаки
Sketcher
Быстрые клавиши
Shift+Ctrl+R
Представлено в версии
0.15
См. также
Нет

Description

The Sketcher SelectRedundantConstraints tool selects the redundant constraints in the sketch.

If such constraints exist in a sketch the Solver messages section of the Sketcher Dialog displays this message:

  • Redundant constraints: (#, #, #)

Where (#, #, #) are the indices of the constraints. Clicking the underlined text will select the redundant constraints.

Please note that a sketch can also have redundant constraints if this message is displayed:

  • Over-constrained: (#, #, #)

Применение

  1. There are several ways to invoke the tool:
    • Click the underlined text in the Sketcher Dialog as described above.
    • Select the Sketch → Sketcher visual → Select redundant constraints option from the menu.
    • Use the keyboard shortcut: Z then P, then R.
  2. The redundant constraints are selected.
  3. Optionally click in an empty area in the 3D view to clear the selection.

Notes

  • Redundant constraints must be removed from the sketch.
  • Instead of the proposed indices it is also possible to delete other constraints.