Sketcher External

From FreeCAD Documentation
This page is a translated version of the page Sketcher External and the translation is 17% complete.
Outdated translations are marked like this.

Sketcher External

poziția meniului
Sketch → Sketcher geometries → Sketcher External
Ateliere
Sketcher
scurtătură
X
Prezentat în versiune
-
A se vedea, de asemenea,
ConstructionMode

Descriere

Instrumentul de geometrie externă Sketcher( External Geometry) este folosit atunci când trebuie aplicată o constrângere între geometria schiței și ceva în afara schiței. Funcționează prin introducerea unei constrângeri a unei constrângeri de construcție geometrice în schiță. Culoarea implicită a marginilor exterioare conectate este purpurie. Ca și geometria standard a construcției, care nu este conectată (albastră), geometria externă conectată este de asemenea vizibilă numai atunci când desenul este în modul de editare și nu este utilizat în rezultatul următor și nici nu este utilizat într-un alt instrument. Ambele tipuri de geometrie a construcției din schiță pot fi folosite ca referințe la constrângeri.

The two magenta lines are external geometry linked to edges of a pre-existing Pad. They are used to constrain the circles.

Utilizare

See also: Drawing aids.

  • Create a new sketch, or open an existing sketch.
  • Click 'Sketcher External' button
  • Select an edge or a vertex that you want to link to in the sketch.
  • Press Esc, or select another tool to stop importing geometry into the sketch.

Notes

  • Only edges and vertices from objects within the same coordinate system can be selected. The sketch and the object must be in same Body, or the same Part, or both in the global coordinate system. Use a Binder to bring a copy of the object into the current coordinate system if required.
  • Circular dependencies are not allowed. You cannot link to an object that depends on the sketch itself.
  • Links to elements from other sketches are possible, and encouraged, as they are more reliable than links to generated (solid) geometry. The latter can suffer from the Topological Naming Problem. See Advice for stable models.