Ambiente de trabajo Borrador
El entorno de Boceto permite dibujar rápidamente objetos 2D simples en el documento actual, y ofrecer diversas herramientas para poderlas modificar después. Algunas de dichas herramientas también funcionan sobre otros objetos de FreeCAD, no sólo en los creados con el entorno de Boceto. También proporciona un completo sistema de ajuste, y varias utilidades para manejar objetos y configuraciones.
Dibujando objetos
Estas son las herramientas para crear objetos.
Línea de 2 puntos: Dibuja un segmento de línea entre 2 puntos
Polilínea (Línea de múltiples puntos): Dibuja una polilínea compuesta por múltiples segmentos de línea
Circunferencia: Dibuja una circunferencia a partir de su centro y radio
Arco: Dibuja un segmento de arco a partir de su centro, radio ángulo de inicio y ángulo final
Ellipse: Draws an ellipse from two corner points
Polígono: Dibuja un polígono regular a partir del centro y radio de la circunferencia que lo circunscribe
Rectángulo: Dibuja un rectángulo a partir de 2 puntos de su diagonal
Texto: Dibuja una anotación de múltiples líneas de texto
Cota: Dibuja una cota dimensional
BSpline: Dibuja una B-Spline a partir de una serie de puntos
Punto: Inserta un objeto punto
ShapeString: The ShapeString tool inserts a compound shape representing a text string at a given point in the current document
Facebinder: Creates a new object from selected faces on existing objects
Bezier Curve: Draws a Bezier curve from a series of points
Label: Places a label with an arrow pointing to a selected element introducido en la versión 0.17
Modificando objetos
Estas son las herramientas para la edición de los objetos existentes. Trabajan sobre los objetos seleccionados, pero si no hay ningún objeto seleccionado, permiten seleccionar uno.
Move: Moves object(s) from one location to another
Rotate: Rotates object(s) from a start angle to an end angle
Offset: Moves segments of an object about a certain distance
Trim/Extend (Trimex): Trims or extends an object
Upgrade: Joins objects into a higher-level object
Downgrade: Explodes objects into lower-level objects
Scale: Scales selected object(s) around a base point
Drawing: Writes selected objects to a Drawing sheet
Edit: Edits a selected object
Wire to BSpline: Converts a wire to a BSpline and vice-versa
Add point: Adds a point to a wire or BSpline
Delete point: Deletes a point from a wire or BSpline
Shape 2D View: Creates a 2D object which is a flattened 2D view of another 3D object
Draft to Sketch: Converts a Draft object to Sketch and vice-versa
Array: Creates a polar or rectangular array from selected objects
Path Array: Creates an array of objects by placing the copies along a path
Clone: Clones the selected objects
Mirror: Mirrors the selected objects
Stretch: Stretches the selected objects introduced in version 0.17
Utility tools
Additional tools available via right-click context menu, depending on the selected objects.
Set working plane: Sets a working plane from a standard view or a selected face
Finish line: Ends the drawing of the current wire or bspline, without closing it
Close line: Ends the drawing of the current wire or bspline, and closes it
Undo line: Undoes the last segment of a line
Toggle construction mode: Toggles the Draft construction mode on/off
Toggle continue mode: Toggles the Draft continue mode on/off
- File:Draft ApplyStyle.png Apply style: Applies the current style and color to selected objects
Toggle display mode: Switches the display mode of selected objects between "flat lines" and "wireframe"
Add to group: Quickly adds selected objects to an existing group
Select group contents: Selects the contents of a selected group
- File:Draft ToggleSnap.png Toggle snap: Toggles object snapping on/off
- File:Draft ToggleGrid.png Toggle grid: Toggles the grid on/off
- File:Draft ShowSnapBar.png Show snap bar: Shows/hides the snapping toolbar
Heal: Heals problematic Draft objects found in very old files
Flip Dimension: Flips the orientation of the text of a dimension
- File:Draft VisGroup.png VisGroup: Creates a VisGroup in the current document
- File:Draft Slope.png Slope: Changes the slope of selected Lines or Wires introduced in version 0.17
AutoGroup: Automatically place new objects in a given group introduced in version 0.17
- File:Draft SetWorkingPlaneProxy.png Set Working Plane Proxy: Add a proxy object in the document to store a Working Plane position introduced in version 0.17
Add to Construction group: Add selected objects to the Construction group introduced in version 0.17
Preferences
Preferences...: Preferences disposable in Draft Tools.
Formatos de archivo
El módulo de Boceto proporciona a FreeCAD importadores y exportadores para los siguientes formatos de archivo:
Preference ... Import Export
- Autodesk .DXF: Importa y exporta archivos Drawing Exchange Format creados con otras aplicaciones de CAD 2D
- SVG (como geometría): Importa y exporta archivos Scalable Vector Graphics creados con aplicaciones de dibujo vectoriales
- Open Cad format .OCA: Importa y exporta archivos OCA/GCAD, un potencialmente nuevo formato de archivo abierto para CAD
- Airfoil Data Format .DAT: Importa archivos DAT describiendo Airfoil perfiles
- Autodesk .DWG: Importar y exportar archivos DWG por medio del importador DXF, cuando la utilidad Teigha Converter está instalada.
- FreeCAD and DWG Import: importa y exporta archivos DWG
- FreeCAD and DXF Import: importa y exporta archivos DXf
Características adicionales
- Ajuste: Permite colocar los nuevos puntos en lugares especiales de los objetos existentes
- Restricciones: Permite situar los puntos nuevos horizontal o verticalmente respecto a puntos previos
- Trabajando con coordenadas manualmente: Permite introducir coordenadas manualmente, en lugar de indicarlas en la pantalla
- Working plane: Allows you to define a plane in the 3D space, where next operations will take place
Archivos de guión
El módulo Boceto presenta una completa Draft API para que pueda usar sus funciones en scripts y macros