Создать примитивы
Создать примитивы |
Системное название |
---|
Part Primitives |
Расположение в меню |
Деталь -> Создать примитивы... |
Верстаки |
Part(Деталь) |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Построитель форм |
Description
Инструмент для создания геометрических параметризованных примитивов.
Primitive shapes that can be created with the Part Workbench.
Usage
To create a primitive, either
- In the appearing dialog select primitive type, set its parameters and location, finally press Create
The dialog keeps open so that you can subsequently create further primitives.
To edit a primitives there are 2 ways:
Using the dialog: introduced in version 0.19
- Select the primitive in the tree and double-click on it.
- The same dialog will open that was also used to create the primitive. Change there the parameters and you get a live preview of the changed primitive.
- To finish the editing press OK.
Using the property editor:
- Select the primitive in the tree.
- Edits its properties in the Properties table.
- В настоящее время этот инструмент может создать параметрические:
The following primitives can be created:
- Plane: Creates a plane.
- Box: Creates a box. This object can also be created with the Box tool.
- Cylinder: Creates a cylinder. This object can also be created with the Cylinder tool.
- Cone: Creates a cone. This object can also be created with the Cone tool.
- Sphere: Creates a sphere. This object can also be created with the Sphere tool.
- Ellipsoid: Creates a ellipsoid.
- Torus: Creates a torus. This object can also be created with the Torus tool.
- Prism: Creates a prism.
- Wedge: Creates a wedge.
- Helix: Creates a helix.
- Spiral: Creates a spiral.
- Circle: Creates a circular edge.
- Ellipse: Creates an elliptical edge.
- Point: Creates a point (vertex).
- Line: Creates a line (edge).
- Regular Polygon: Creates a regular polygon.
Scripting
See also: Part scripting
Test the creation of the primitives with a script. introduced in version 0.19
This can be run from the Python console.
import parttests.part_test_objects as pto
pto.create_test_file("example_file")
This script is located in the installation directory of the program, and can be examined to see how the basic primitives are built.
$INSTALL_DIR/Mod/Part/parttests/part_test_objects.py
It can be used as input to the program as well.
freecad $INSTALL_DIR/Mod/Part/parttests/part_test_objects.py
Part
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework