Вращать
Вращать |
Системное название |
---|
Part Revolve |
Расположение в меню |
Деталь → Вращать... |
Верстаки |
Part, Complete |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Description
Revolves the selected object around a given axis. The following shape types are allowed, and lead to the listed output shapes (See Notes for exceptions):
Input shape | Output shape |
---|---|
Vertex | Edge |
Edge | Face |
Wire | Shell |
Face | Solid |
Shell | Compound solid (Compsolid) |
Solids or compound solids are not allowed as input shapes. Normal compounds are currently not allowed, too. Future versions will check the actual shape type of compound objects.
The Angle argument specifies how far the object is to be turned. The coordinates move the origin of the axis of revolving, relative to the origin of the coordinate system.
If you select a user defined axis, the numbers define the direction of the revolving axis with respect to the coordinate system: If the Z coordinate is 0 and the Y and X coordinate are non-zero, then the axis will lie in the X-Y-plane. Its angle is such that its tangent is the ratio of the given X and Y coordinates.
Notes
- If your version of FreeCAD has a check box for Solid in the Revolve dialog, you can make Solids from closed Wires and Edges.
- If Revolve is performed using an axis that intersects the face to rotate, and you want to create a solid, the result might be invalid. This can happen for various reasons, self-intersection, direction, etc.
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework