TechDraw HowTo Page

From FreeCAD Documentation
Revision as of 09:18, 16 August 2020 by Catman (talk | contribs) (added link)

Back to TechDraw Tutorials


Tutorial
Topic
How To's and Misc Info
Level
all
Time to complete
n/a
Authors
n/a
FreeCAD version
0.19
Example files
None
See also
None

Introduction

This page provide a collection of hints and little guides on using the TechDraw Workbench. Adding new findings and best practices is encouraged.

Enable/Disable Centermarks

When the centermarks are disabled hole centers and similar things can not be dimensioned. The centermarks are rendered as a little cross.

  • Select the view port (e.g. "Front")
  • In the property panel, 'View Tab set the value Arc Center Marks to true

Note in this tab are other settings for the view that might be useful.