TechDraw HowTo Page: Difference between revisions

From FreeCAD Documentation
(Link to Change Templat files)
(typo)
Line 10: Line 10:


=== Enable/Disable Centermarks===
=== Enable/Disable Centermarks===
When the centermarks are disabled hole centers and similar things can not be dimensioned. The centermarks are redndered as a little cross.
When the centermarks are disabled hole centers and similar things can not be dimensioned. The centermarks are rendered as a little cross.


* Select the view port (e.g. "Front")
* Select the view port (e.g. "Front")

Revision as of 01:00, 27 July 2020

Back to TechDraw Tutorials

Introduction

This page provide a collection of hints and little guides on using the TechDraw Workbench. Adding new findings and best practices is encouraged.

Enable/Disable Centermarks

When the centermarks are disabled hole centers and similar things can not be dimensioned. The centermarks are rendered as a little cross.

  • Select the view port (e.g. "Front")
  • In the property panel, 'View Tab set the value Arc Center Marks to true

Note in this tab are other settings for the view that might be useful.

Change Template Files for existing Drawings