Sketcher ToggleDrivingConstraint

From FreeCAD Documentation
Revision as of 17:58, 29 February 2024 by FBXL5 (talk | contribs) (several ways added)

Sketcher ToggleDrivingConstraint

Menu location
Sketch → Sketcher constraints → Toggle driving/reference constraint
Workbenches
Sketcher
Default shortcut
K X
Introduced in version
0.16
See also
Sketcher Toggle Construction

Description

The Toggle driving constraint tool turns dimensional constraints (Lock, Horizontal/Vertical distance, Length, Radius and Angle) into reference mode, and back. The icons in the toolbar turn blue, and rather than dimensional constraints, reference dimensions are created. Reference dimensions do not constrain the sketch. It can be useful to create reference dimensions in a sketch as a way to check on measurements; when given a name, they can also be used to drive constraints in another sketch through expressions.


The Sketcher Constraint toolbar with the dimensional constraints in reference dimension mode (blue).


A horizontal distance constraint (50 mm), a vertical constraint (30 mm) and an angle constraint (75°) were set to define the profile; a reference dimension was added on the slanted line segment to know its length (31.0583 mm).

Usage

  1. There are several ways to invoke the command:
    • Press the Toggle driving/reference constraint button.
    • Select the Sketch → Sketcher constraints → Toggle driving/reference constraint option from the menu.
    • Use the keyboard shortcut: K then X.
  2. The dimensional constraints icons in the Sketcher Constraints toolbar turn from red to blue.
  3. The usual method of creating dimensional constraints works the same, but a blue reference dimension is added instead.
  4. To turn the Sketcher Constraints toolbar back to constraint mode (red), press the Toggle Constraint button again.
  5. To turn a dimensional constraint into a reference dimension, or the reverse, select it and press the Toggle Constraint button.