Sketcher Rotate: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 50: Line 50:
# Optionally check the '''Clone constraints''' checkbox to copy dimensional constraints instead of replacing them with [[Sketcher_ConstrainEqual|Equal]] constraints.
# Optionally check the '''Clone constraints''' checkbox to copy dimensional constraints instead of replacing them with [[Sketcher_ConstrainEqual|Equal]] constraints.
# Pick the rotation center. Or with Pos-OVP: enter its X and/or Y coordinate.
# Pick the rotation center. Or with Pos-OVP: enter its X and/or Y coordinate.
# Pick a point to define the start angle of the rotation. Or with Dim-OVP: enter it.
# Pick a point to define the start angle. Or with Dim-OVP: enter it.
# Pick a point to define rotation angle. Or with Dim-OVP: enter it.
# Pick a point to define rotation angle. Or with Dim-OVP: enter it.
# The geometry is rotated or copies are created.
# The geometry is rotated or copies are created.

Revision as of 20:32, 29 March 2024

Other languages:
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher Rotate

Menu location
Sketch → Sketcher tools → Polar transform
Workbenches
Sketcher
Default shortcut
Z P
Introduced in version
0.22
See also
None

Description

The Sketcher Rotate tool rotates and optionally copies selected elements. Copies are evenly distributed along the rotation angle.

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters.
Dim-OVP = Dimensional On-View-Parameters.

  1. Select one or more elements (edges or points).
  2. There are several ways to invoke the tool:
    • Press the Polar transform button.
    • Select the Sketcher → Sketcher tools → Polar transform option from the menu.
    • Right-click in the 3D view and select the Polar transform option from the context menu.
    • The keyboard shortcut: Z then P.
  3. The cursor changes to a white cross with the tool icon.
  4. The Rotate parameters section is added at the top of the Sketcher Dialog.
  5. Optionally change the number of Copies (this can also be done after picking the center and/or the start angle):
    • Enter a number.
    • Press the U key to increase the number.
    • Press the J key to decrease the number.
  6. Optionally check the Clone constraints checkbox to copy dimensional constraints instead of replacing them with Equal constraints.
  7. Pick the rotation center. Or with Pos-OVP: enter its X and/or Y coordinate.
  8. Pick a point to define the start angle. Or with Dim-OVP: enter it.
  9. Pick a point to define rotation angle. Or with Dim-OVP: enter it.
  10. The geometry is rotated or copies are created.