Sketcher ReorientSketch: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 24: Line 24:


<!--T:6-->
<!--T:6-->
The [[Image:Sketcher_ReorientSketch.svg|24px]] [[Sketcher_ReorientSketch|Sketcher ReorientSketch]] tool places an existing sketch on one of the main planes with an optional offset. It can also be used to only detach a sketch.
The [[Image:Sketcher_ReorientSketch.svg|24px]] [[Sketcher_ReorientSketch|Sketcher ReorientSketch]] tool places a sketch on one of the main planes with an optional offset. It can also be used to only detach a sketch.


==Usage== <!--T:3-->
==Usage== <!--T:3-->

Revision as of 10:31, 27 March 2024

This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher ReorientSketch

Menu location
Sketch → Reorient sketch
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
-
See also
Sketcher MapSketch, Sketcher NewSketch

Description

The Sketcher ReorientSketch tool places a sketch on one of the main planes with an optional offset. It can also be used to only detach a sketch.

Usage

  1. Select a sketch.
  2. There are several ways to invoke the tool:
  3. If the sketch is attached:
    1. The Sketch has support dialog opens.
    2. Press the Yes button to detach the sketch.
  4. The Choose orientation dialog opens.
  5. Optionally press the Cancel button to only detach the sketch and finish the tool.
  6. Specify the plane for the orientation:
    • If the Reverse direction checkbox is not checked:
      • Top: XY-Plane
      • Front: XZ-Plane
      • Right: YZ-Plane
    • If the Reverse direction checkbox is checked:
      • Bottom: XY-Plane
      • Rear: XZ-Plane
      • Left: YZ-Plane
  7. Optionally change the Offset. The offset is measured along the global Z, Y or X axis.
  8. Press the OK button.