Sketcher CreateCircle: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 40: Line 40:
#* Press the {{Button|[[Image:Sketcher_CreateCircle.svg|16px]] [[Sketcher_CreateCircle|Center and rim point]]}} button.
#* Press the {{Button|[[Image:Sketcher_CreateCircle.svg|16px]] [[Sketcher_CreateCircle|Center and rim point]]}} button.
#* Select the {{MenuCommand|Sketcher → Sketcher geometries → [[Image:Sketcher_CreateCircle.svg|16px]] Create circle}} option from the menu.
#* Select the {{MenuCommand|Sketcher → Sketcher geometries → [[Image:Sketcher_CreateCircle.svg|16px]] Create circle}} option from the menu.
#* Right-click in the Sketch view and select the {{MenuCommand|[[Image:Sketcher_CreateCircle.svg|16px]] Create circle}} option from the context menu.
#* Right-click in the [[3D_view|3D view]] and select the {{MenuCommand|[[Image:Sketcher_CreateCircle.svg|16px]] Create circle}} option from the context menu.
#* The keyboard shortcut: {{KEY|G}} then {{KEY|C}}.
#* The keyboard shortcut: {{KEY|G}} then {{KEY|C}}.
# The cursor changes to a white cross with the current tool mode icon.
# The cursor changes to a white cross with the current tool mode icon.

Revision as of 19:11, 12 February 2024

Sketcher CreateCircle

Menu location
Sketch → Sketcher geometries → Create circle
Workbenches
Sketcher
Default shortcut
G C
Introduced in version
-
See also
Sketcher Arc

Description

The Sketcher CreateCircle tool creates a circle by its center and a point along the radius. introduced in version 0.22: Or optionally by three points on the circle outline.

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters. introduced in version 0.22
Dim-OVP = Dimensional On-View-Parameters. introduced in version 0.22

  1. There are several ways to invoke the tool:
    • Press the Center and rim point button.
    • Select the Sketcher → Sketcher geometries → Create circle option from the menu.
    • Right-click in the 3D view and select the Create circle option from the context menu.
    • The keyboard shortcut: G then C.
  2. The cursor changes to a white cross with the current tool mode icon.
  3. The Circle parameters section (introduced in version 0.22) is added at the top of the Sketcher Dialog.
  4. Optionally press the M key or select from the dropdown list in the parameters section to change the tool mode:
    • Center:
      1. Pick the center of the circle. Or with Pos-OVP: enter its X and/or Y coordinate.
      2. Pick a point to define the radius. Or with Dim-OVP: enter the radius of the circle.
    • 3 rim points: introduced in version 0.22
      1. Pick three points of the circle outline. Or with Pos-OVP: enter their X and/or Y coordinates. No constraints are created for these points.
  5. The geometry is created and applicable Pos-OVP and Dim-OVP based constraints are added.