FEM ConstraintPlaneRotation/de: Difference between revisions

From FreeCAD Documentation
(Created page with "==Anwendung==")
(Created page with "==Hinweise==")
Line 33: Line 33:
# When a plane rotation constraint is applied to the same face as a displacement/fixed constraint, the displacement/fixed constraint takes preference.
# When a plane rotation constraint is applied to the same face as a displacement/fixed constraint, the displacement/fixed constraint takes preference.


==Notes==
==Hinweise==


# The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html
# The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html

Revision as of 09:48, 23 September 2022

FEM ConstraintPlaneRotation

Menu location
Model → Geometrical Constraints → Constraint plane rotation
Workbenches
FEM
Default shortcut
None
Introduced in version
-
See also
FEM Constraint transform

Beschreibung

Creates a FEM constraint for keeping the nodes in a planar surface in the same plane.

Anwendung

  1. There are several ways to invoke the command:
    • Press the FEM ConstraintPlaneRotation button.
    • Select the Model → Geometrical Constraints → Constraint plane rotation option from the menu.
  2. In the 3D view select the object the constraint should be applied to, which can be a face.

Limitations

  1. Plane rotation constraint can only be applied to a single planar face.
  2. When a plane rotation constraint is applied to the same face as a displacement/fixed constraint, the displacement/fixed constraint takes preference.

Hinweise

  1. The constraint uses the *MPC card in CalculiX. The card is explained in detail at http://web.mit.edu/calculix_v2.7/CalculiX/ccx_2.7/doc/ccx/node220.html