Kreslení Text
Draft Text |
Umístění Menu |
---|
Draft → Text |
Pracovní stoly |
Kreslení, Architektura |
Výchozí zástupce |
T E |
Představen ve verzi |
- |
Viz také |
Nikdo |
Popis
Nástroj Text vkládá text k zadanému bodu v aktuálnímu dokumentu. Použije se tloušťka čáry a barva předem zadaná v záložce Nástrojů.
Alternatively: To create a text label with a leader and an arrow use Draft Label. To create solid text or 3D letters use Draft ShapeString with Part Extrude.
Warning: The texts created with version 0.18 are not backward compatible, so backup your work if you try to open files created with 0.18 with older versions.
Použití
- Stiskněte tlačítko Text nebo klávesy T a potom E
- Klikněte na bod ve 3D pohledu nebo zadejte jeho souřadnice
- Vložte požadovaný text, mezi každým řádkem stiskněte ENTER
- Klávesu ENTER stiskněte 2x pro ukončení operace.
Volby
- Stisknutí klávesy CTRL přichytí Váš bod k nejbližšímu uchopovacímu místu, nezávisle na vzdálenosti od něho.
- Pro zadání souřadnic ručně, jednoduše zadejte číslo a stiskněte ENTER mezi každou z komponent X, Y a Z.
- Stiskněte klávesu ESC nebo tlačítko Cancel pro ukončení aktuálního příkazu
- Stisknutím ENTER nebo Šipka dolu při úpravě textu můžete vložit nebo editovat další řádek textu.
- Stisknutím klávesy Šipka nahoru můžete editovat předcházející řádek textu.
- Dvojím stisknutím ENTER (t.j. nevyplnění posledního řádku) přidáte text do dokumentu a ukončíte editor.
Vlastnosti
- ÚdajePozice: Základní bod textového bloku
- ÚdajeŠtítek textu: Obsah textového bloku
- PohledMód zobrazení: Specifikuje jestli je text zarovnán podle os nebo vždy míří směrem ke kameře
- PohledVelikost fontu: Velikost písmen
- PohledZarovnání: Specifikuje zda je text zarovnán vlevo, vpravo nebo na střed od základního bodu.
- PohledMezera mezi řádky: Specifikuje mezeru mezi řádky textu.
- PohledRotace: Specifikuje rotaci, která bude aplikována na text.
- PohledOsa rotace: Specifikuje osu, která bude použita pro rotaci.
- PohledNázev fontu: Font použitý pro kreslení textu. Může to být název fontu, jako např. "Arial", default styl jako je "sans", "serif" nebo "mono" nebo rodina jako je "Arial,Helvetica,sans" nebo jméno se stylem jako je "Arial:Bold". Není-li zadaný font nalezen v systému, je místo něj použit obecný font.
Data
- ÚdajeText: specifies the contents of the text block as a list of strings; each element on the list, separated by a comma, indicates a new line.
- ÚdajePosition: specifies the base point of the first line of the text block.
- ÚdajeAngle: specifies the rotation of the baseline of the first line of the text block.
- ÚdajeAxis: specifies the axis to use for the rotation.
View
- PohledDisplay Mode: if it is "3D text" the text will be aligned to the scene axes, initially lying on the XY plane; if it is "2D text" the text will always face the camera.
- PohledFont Name: specifies the font to use to draw the text. It can be a font name, such as "Arial", a default style such as "sans", "serif" or "mono", a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold". If the given font is not found on the system, a generic one is used instead.
- PohledFont Size: specifies the size of the letters. If the text object is created in the tree view but no text is visible, increase the size of the text until it is visible.
- PohledJustification: specifies if the text aligns to the left, right or at the center of the base point.
- PohledLine Spacing: specifies the space between lines of text.
Skriptování
Nástroj Text může být využit v makrech a z konzoly Pythonu použitím následující funkce:
The Text tool can be used in macros and from the Python console by using the following function:
Text = makeText(stringlist, point=Vector(0,0,0), screen=False)
- Vytvoří objekt Text na zadaném bodě, je-li poskytnut vektor, s textem obsahujícím řetězec nebo řetězce v seznamu list, jeden řetězec na jeden řádek. * Je použita aktuální barva a výška textu a font specifikovaný v přednastaveních.
- Je-li screenmode True, text se vždy zobrazuje ve směru pohledu, jinak leží v rovině XY.
- Vrací nově vytvořený objekt.
The placement of the Text
can be changed by overwriting its Placement
attribute, or by individually overwriting its Placement.Base
and Placement.Rotation
attributes.
The view properties of Text
can be changed by overwriting its attributes; for example, overwrite ViewObject.FontSize
with the new size in millimeters.
Příklad:
import FreeCAD, Draft
p1 = FreeCAD.Vector(0, 0, 0)
t1 = "This is a sample text"
p2 = FreeCAD.Vector(1000, 1000, 0)
t2 = ["First line", "second line"]
Text1 = Draft.makeText(t1, point=p1)
Text2 = Draft.makeText(t2, point=p2)
Text1.ViewObject.FontSize = 200
Text2.ViewObject.FontSize = 200
p3 = FreeCAD.Vector(-1000, -500, 0)
t3 = ["Upside", "down"]
Text3 = Draft.makeText(t3, point=p3)
Text3.ViewObject.FontSize = 200
ZAxis = FreeCAD.Vector(0, 0, 1)
place3 = FreeCAD.Placement(p3, FreeCAD.Rotation(ZAxis, 175))
Text3.Placement = place3
Text4 = Draft.makeText(t3, point=p3)
Text4.ViewObject.FontSize = 200
Text4.Placement.Rotation = FreeCAD.Rotation(ZAxis, -30)
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub