Draft Snap WorkingPlane/ru

From FreeCAD Documentation
Revision as of 14:53, 1 December 2020 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft WorkingPlane

Системное название
Draft WorkingPlane
Расположение в меню
Черчение → Привязка → К рабочей плоскости
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Всегда помещает захваченную точку на текущую рабочую поверхность, даже если захвачена точка вне рабочей плоскости.

This method always places a new point on the current working plane, even if you also use another snapping method and select a point outside of that working plane.

In other words, it projects an external snapping point to the current working plane.

Snapping the second point of a line to one endpoint of an edge of a body, which is then projected on the XY working plane

Использование



  1. Make sure the working plane is set with Draft SelectPlane.
  2. Make sure Draft ToggleSnap and Draft Snap WorkingPlane are turned on.
  3. Optionally turn on any other Draft Snap method.
  4. Choose a Draft tool to draw a shape.
  5. Move the cursor over any line, edge, vertex, or object, like you would do with other snapping methods.
  6. A small white circle will indicate the point on the working plane to which your new point will be attached.
  7. Click to attach your new point.