Draft "Слой"
Слой |
Системное название |
---|
Draft_Layer |
Расположение в меню |
Utilities → Слой |
Верстаки |
Draft, Arch |
Быстрые клавиши |
Нет |
Представлено в версии |
0.19 |
См. также |
Автогруппировка |
Описание
The Draft Layer command creates a Draft Layer. A layer is a special kind of group with a number of visual properties. These properties, and any changes to them, are propagated to the objects placed inside the layer. The layers themselves are put in another special group: the Draft LayerContainer.
Применение
- There are several ways to invoke the command:
- If it does not exist the layer container is created first.
- A layer is created and put in the layer container.
- Optionally change the properties of the layer.
- Optionally put objects in the layer by drag and dropping them on the layer in the Tree view. Objects can also be put in a layer by editing the ДанныеGroup property of the layer.
- Optionally activate the layer.
Layer container options
For a Draft LayerContainer these additional options are available in the Tree view context menu:
- The base label of a layer is its ДанныеLabel stripped of trailing digits and spaces. All layers with the same base label are merged into a single layer with the ДанныеLabel set to that base label.
Layer options
For a Draft Layer these additional options are available in the Tree view context menu:
- Activate this layer: activates the selected layer.
- Select layer contents: selects the objects inside the selected layer.
Drag and drop behavior
If you drop an object from a Std Group, or a group-like object such as an Arch BuildingPart, on a layer in the Tree view, it is not removed from the group, and vice versa. To remove an object from a layer it must be dropped on another layer or on the document node. There is no need to hold down the Ctrl key when dragging from or dropping on a layer.
Примечания
- A new layer can also be created with the Draft AutoGroup command.
- The BIM Workbench offers a complete layer manager tool which will eventually be included in the Draft Workbench.
Свойства
See also: Property editor.
A Draft Layer object is derived from an App FeaturePython object and inherits all its properties. It also has the following additional properties:
Данные
Layer
- ДанныеGroup (
LinkList
): specifies the objects that are inside the layer.
Вид
Layer
The properties in this section are applied to objects that are put inside the layer. And any changes to these properties are propagated to them. For two properties, ВидLine Color and ВидShape Color, this behavior is optional.
- ВидDraw Style (
Enumeration
): specifies the draw style of the layer:Solid
,Dashed
,Dotted
orDashdot
- ВидLine Color (
Color
): specifies the line color of the layer. - ВидLine Width (
Float
): specifies the line width of the layer. - ВидOverride Line Color Children (
Bool
): specifies if changes to the ВидLine Color of the layer are propagated to the objects inside the layer. - ВидOverride Shape Color Children (
Bool
): specifies if changes to the ВидShape Color of the layer are propagated to the objects inside the layer. - ВидShape Color (
Color
): specifies the shape color of the layer. - ВидTransparency (
Percent
): specifies the transparency of the layer.
- ВидLine Print Color (
Color
): specifies the line print color of the layer. - ВидUse Print Color (
Bool
): specifies if the ВидLine Print Color of the layer is used when a TechDraw DraftView is created from the objects inside the layer.
Программирование
Смотрите так же: Основы составления скриптов в FreeCAD.
To create a Draft Layer use the make_layer
method of the Draft module. To add objects to, or remove objects from, a layer change its Group
property.
import FreeCAD as App
import Draft
doc = App.newDocument()
layer = Draft.make_layer(line_color=(1.0, 0.0, 0.0, 0.0),
shape_color=(1.0, 1.0, 0.0, 0.0))
polygon1 = Draft.make_polygon(5, radius=1000)
polygon2 = Draft.make_polygon(3, radius=500)
polygon3 = Draft.make_polygon(6, radius=220)
layer.Group = [polygon1, polygon2, polygon3]
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web