# Draft Arc 3Points/ru

This page is a translated version of the page Draft Arc 3Points and the translation is 38% complete.
Outdated translations are marked like this.
Other languages:
Системное название Draft Arc 3Points Draft Arc 3Points Draft → Arc 3 points Draft, Arch A T 0.19 Draft Arc, Draft Circle, Draft Ellipse

## Описание

The Draft Arc 3Points command creates a circular arc on the current working plane from three points that define its circumference. The center and radius are calculated from these points.

A Draft Arc is in fact a Draft Circle with a ДанныеFirst Angle that is not the same as its ДанныеLast Angle.

Arc defined by three points on its circumference

## Применение

1. There are several ways to invoke the command:
• Press the button.
• Select the Drafting → Arc tools → Arc by 3 points option from the menu.
• Use the keyboard shortcut: A then T. introduced in version 0.20
3. Pick the first point in the 3D view, or type coordinates and press the Enter point button.
4. Pick the second point in the 3D view, or type coordinates and press the Enter point button.
5. Pick the third point in the 3D view, or type coordinates and press the Enter point button.

## Опции

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 0.22).

• To manually enter coordinates enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• Press R or click the Relative checkbox to toggle relative mode. If relative mode is on, coordinates are relative to the last point, if available, else they are relative to the coordinate system origin.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system. introduced in version 0.20
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating arcs. introduced in version 0.20
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

## Примечания

• A Draft Arc can be edited with the Draft Edit command.

## Настройки

• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a non-editable Part Feature instead of a Draft Circle.

## Свойства

See Draft Circle.

## Программирование

To create a Draft Arc by 3 points use the `make_arc_3points` method of the Draft module:

```arc = make_arc_3points(points, placement=None, face=False, support=None, map_mode="Deactivated", primitive=False)
```
• Creates an `arc` object from the given `points` list.
• If a `placement` is given, the center of the circular arc will be moved to this place. See Placement for more information.
• If `face` is `True`, the arc will make a face, that is, it will appear filled.
• If `support` is given, it is a `LinkSubList`, that is, a list indicating an object and a subelement of that object. This is used so that the object appears referenced to this support.
For example: `support=[(obj, ("Face1"))]`.
• If `map_mode` is given, it is a string defining a type of mapping, for example: `map_mode='FlatFace'`, `map_mode='ThreePointsPlane'`, etc. See Part EditAttachment for more information.
• If `primitive` is `True`, the arc created will be a simple Part Feature, not a complex Draft object.

Пример:

```import FreeCAD as App
import Draft

doc = App.newDocument()

points = [App.Vector(0, 0, 0),
App.Vector(5, 10, 0),
App.Vector(10, 0, 0)]

arc = Draft.make_arc_3points(points)

doc.recompute()
```