Draft Snap Grid/ru

From FreeCAD Documentation
This page is a translated version of the page Draft Snap Grid and the translation is 31% complete.
Outdated translations are marked like this.

Draft Grid

Расположение в меню
Draft → Snapping → Grid
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Draft ToggleGrid/ru, Draft Snap/ru

Описание

The Draft Snap Grid option snaps to the intersections of grid lines.

Snapping the second point of a line to the grid

Использование

  1. Optionally change the working plane and/or the grid.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap Grid is not active do one of the following:
    • Press the button in the Draft snap toolbar.
    • Hold down the button in the Draft snap widget and in the menu that opens select the Snap Grid option.
  4. Choose a Draft or BIM command to create your geometry.
  5. Note that you can also change snap options while a command is active.
  6. If required use Draft ToggleGrid to display the grid. The grid must be visible for this snap option to work.
  7. Move the cursor near the intersection of two grid lines.
  8. If an intersection is found the point is marked and the icon is displayed near the cursor.
  9. Click to confirm the point.

See Draft Snap.

  • Several grid preferences are available: Edit → Preferences... → Draft → Grid and snapping.