Draft SVG

From FreeCAD Documentation
Revision as of 14:39, 1 September 2021 by Roy 043 (talk | contribs)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Description

Draft SVG is a software module used by the Std Open, Std Import and Std Export commands to handle the SVG file format.

Inkscape drawing exported to SVG, which is subsequently opened in FreeCAD

Importing

The following SVG objects can be imported:

  • PATH objects
  • LINE objects
  • RECT objects
  • CIRCLE objects
  • ELLIPSE objects
  • POLYGON objects
  • POLYLINE objects

Limitations

FreeCAD will not import path objects that have only one point (forum discussion).

Exporting

The following FreeCAD objects can be exported:

  • Lines and wires (polylines)
  • Arcs and circles
  • Faces
  • Texts
  • Dimensions

Limitations

SVG is a 2D format, so all Z information will be disregarded (all objects will be flattened).

Unit Handling

When exporting, a User Unit (px) equals one millimeter.

When importing, the width, height and viewBox attributes are respected. All elements are scaled to their size in millimeter, which is FreeCAD internal unit. If the SVG does not contain information on its physical size, it is assumed to have 90 DPI resolution. Using absoulte units in attributes inside the SVG should be avoided. Relative units like em,ex and % are currently not supported.

The Inkscape SVG Editor currently works only with 90 DPI documents. No matter which unit is selected in Inkscape. All the output has to be considered converted to 90 DPI and rounded to 6 decimal places. As FreeCAD (and the SVG standard) is agnostic to the precision of rounding done in Inkscape these values will not be rounded on input. And odd values in millimeter will remain. If you need the SVG import not to be rounded, work on User Units (px) in Inkscape. Scaling can be done after the import to FreeCAD or by changing the width, height and viewbox attributes.

Preferences

See Import Export Preferences.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To export objects to SVG use the export method of the importSVG module.

importSVG.export(exportList, filename)

Example:

import FreeCAD as App
import Draft
import importSVG

doc = App.newDocument()

polygon1 = Draft.make_polygon(3, radius=500)
polygon2 = Draft.make_polygon(5, radius=1500)

doc.recompute()

objects = [polygon1, polygon2]
importSVG.export(objects, "/home/user/Pictures/myfile.svg")