Taslak Düzenle

From FreeCAD Documentation
Revision as of 13:38, 8 January 2019 by Skywalker21 (talk | contribs) (Created page with "== Nasıl Kullanılır ==")

Düzenle

Menü konumu
Taslak → Düzenle
Tezgahlar
Taslak, Yapı
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
-
Ayrıca bkz
Hiçbiri

Tanım

Düzenleme aracı, seçili nesnenin Tel köşeleri, Dikdörtgen uzunluğu ve genişliği veya Çember yarıçapı gibi belirli özelliklerini grafiksel olarak düzenlemenizi sağlar.

Nesnenin düzenleme moduna girmekten başka bir şey yapmaz. Nesneyi düzenlemenin bir başka yolu, ağaç görünümündeki öğeye çift tıklamaktır.

File:Draft edit example.jpg

Tel düzenleme

Nasıl Kullanılır

  1. Select an object.
  2. Press the Draft Edit button, or double-click the object in the tree view, or use the Std Edit tool.
  3. Click on a point that you wish to move.
  4. Click another point on the 3D view, or type a coordinate and press the add point button.
  5. Press Esc or the Close button to complete the current command.

The Edit tool only works on one selected object at a time.

The tool mostly works on Draft objects: Draft Wires, Draft Lines, Draft Rectangles, Draft Circles, Draft Arcs, Draft Polygons, and Draft BSplines. Other object types must first be converted to these objects.

Options

  • Press X, Y or Z after a point to constrain the next point on the given axis.
  • To enter coordinates manually, simply enter the numbers, then press Enter between each X, Y and Z component. You can press the add point button when you have the desired values to insert the point.
  • Hold Ctrl while drawing to force snapping your point to the nearest snap location, independently of the distance.
  • Hold Shift while drawing to constrain your next point horizontally or vertically in relation to the last one.
  • Press Esc or the Close button or the Draft Edit button again to finish editing.

Some objects allow you to insert or delete points:

  • Press the add point button, and then click on the wire or spline to add a new point.
  • Press the remove point button, and then click on a point along the wire or spline to remove it.

Scripting

See also: Draft API and FreeCAD Scripting Basics.

There is no programming interface available for the Edit tool. Each object is modified by changing its attributes directly.