Draft Snap Grid/ru

From FreeCAD Documentation
Revision as of 18:42, 22 November 2022 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Draft Grid

Системное название
Draft Snap Grid
Расположение в меню
Draft → Snapping → Grid
Верстаки
Draft, Arch
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Draft ToggleGrid/ru, Draft Snap/ru

Описание

The Draft Snap Grid option snaps to the intersections of grid lines. The grid can only be used if the Use grid preference is selected. See Preferences.

Snapping the second point of a line to the grid

Использование

  1. Optionally change the working plane and/or the grid.
  2. Make sure snapping is enabled. See Draft Snap Lock.
  3. If Draft Snap Grid is not active do one of the following:
    • Press the button in the Draft snap toolbar.
    • Hold down the button in the Draft snap widget and in the menu that opens select the Snap Grid option.
  4. Choose a Draft or Arch command to create your geometry.
  5. Note that you can also change snap options while a command is active.
  6. The grid is now displayed if it was not yet visible.
  7. Move the cursor near the intersection of two grid lines.
  8. If an intersection is found the point is marked and the icon is displayed near the cursor.
  9. Click to confirm the point.

See Draft Snap.

  • To use the grid select: Edit → Preferences... → Draft → Grid and snapping → Grid → Use grid. After changing this preference you must restart FreeCAD.
  • Several other grid preferences are also available: Edit → Preferences... → Draft → Grid and snapping → Grid.