Sketcher SketchObject
Einleitung
A Sketcher SketchObject, or formally a Sketcher::SketchObject
, is the base element to create 2D objects with the Sketcher Workbench.
The Sketcher::SketchObject
is derived from Part Part2DObject, which means it is a Part Feature object specialized for 2D geometry. Like Part2DObject, the SketchObject can be attached to planes and faces. In addition, the SketchObject can handle geometrical constraints of the lines and curves that are drawn within it.
Simplified diagram of the relationships between the core objects in FreeCAD. The Sketcher::SketchObject
class is specialized for 2D shapes, and additionally it includes an extension to handle geometrical constraints of its elements.
Usage
- Switch to the Sketcher Workbench.
- Press Sketcher NewSketch.
- Select a Sketch orientation: XY-plane, XZ-plane, or YZ-plane. Optionally also choose Reverse direction, and give an Offset value.
- Press OK.
Although the SketchObject can be used by itself to draw on a plane, it is most commonly used in conjunction with the PartDesign Workbench to create extruded solids.
- Switch to the PartDesign Workbench.
- Press PartDesign Body.
- Press PartDesign NewSketch.
- Select feature: XY_Plane (Base plane), XZ_Plane (Base plane), or YZ_Plane (Base plane).
- Press OK.
Properties
See Property for all property types that scripted objects can have.
A Sketcher SketchObject (Sketcher::SketchObject
class) is derived from a Part Part2DObject (Part::Part2DObject
class), therefore it shares all the latter's properties.
In addition to the properties described in Part Part2DObject, the basic Sketcher SketchObject has the following properties in the property editor. Hidden properties can be shown by using the Show all command in the context menu of the property editor.
Data
Attachment
- DatenMap Mode, DatenMap Reversed, DatenAttachment Offset: same as Part Part2DObject. See Part Attachment for more information on all attachment mapping modes.
Sketch
- DatenConstraints: named constraints, if they exist; otherwise it is an empty list
[]
.
Hidden properties Data
See Part Part2DObject for the rest of the hidden properties.
Base
- DatenProxy (
PythonObject
): a custom class associated with this object. This only exists for the Python version. See Scripting.
Sketch
- DatenGeometry (
GeometryList
): a list of Part geometries that exist inside the sketch. - DatenExternal Geometry (
LinkSubList
): a list of Part geometries outside this Sketch that are used for reference.
View
Auto Constraints
- AnsichtAutoconstraints (
Bool
): iftrue
it will try setting constraints when the geometry is drawn.
Visibility automation
- AnsichtEditing Workbench (
String
): name of the workbench to activate when editing the sketch; it defaults toSketcherWorkbench
. - AnsichtHide Dependent (
Bool
): iftrue
all objects that depend on the sketch are hidden when opening the sketch. - AnsichtRestore Camera (
Bool
): iftrue
the camera position is saved before opening the sketch, and is restored after closing it. - AnsichtShow Links (
Bool
): iftrue
all objects used in links to external geometry are shown when opening the sketch. - AnsichtShow Support (
Bool
): iftrue
all objects this sketch is attached to are shown when opening the sketch.
Hidden properties View
Base
- AnsichtProxy (
PythonObject
): a custom view provider class associated with this object. This only exists for the Python version. See Scripting.
Visibility automation
- AnsichtTempo Vis (
PythonObject
): a custom class associated with this object, that handles hiding and showing other objects when opening and closing the sketch.
All other view properties, including hidden properties, are those of the base Part Feature object.
Scripting
See also: FreeCAD Scripting Basics, and scripted objects.
See Part Feature for the general information on adding objects to the document.
A SketchObject is created with the addObject()
method of the document.
import FreeCAD as App
doc = App.newDocument()
obj = App.ActiveDocument.addObject("Sketcher::SketchObject", "Sketch")
obj.Label = "Custom label"
This basic Sketcher::SketchObject
doesn't have a Proxy object so it can't be fully used for sub-classing.
Therefore, for Python subclassing, you should create the Sketcher::SketchObjectPython
object.
import FreeCAD as App
doc = App.newDocument()
obj = App.ActiveDocument.addObject("Sketcher::SketchObjectPython", "CustomSketch")
obj.Label = "Custom label"
(FIXME)
- Die Werkzeuge: Skizze erstellen, Skizze bearbeiten, Skizze verlassen, Skizze anzeigen, View section, Skizze einer Fläche zuordnen..., Reorient sketch, Skizze überprüfen, Skizzen zusammenführen, Skizze spiegeln
- Skizzen-Geometrien: Punkt, Linie, Bögen erstellen, Bogen, Kreisbogen durch drei Punkte, Kreise erstellen, Kreis, Kreis durch drei Punkte, Kegelförmige Körper erstellen, Ellipse mit Mittelpunkt, Ellipse durch drei Punkte, Ellipsenbogen, Hyperbel erstellen, Parabel erstellen, B-splines erstellen, B-spline, Create periodic B-spline, Linienzug (Mehrpunktlinie), Rechteck, Reguläres Polygon erstellen, Dreieck, Quadrat, Fünfeck, Sechseck, Siebeneck, Achteck, Create Regular Polygon, Nut, Abrundung erstellen, Kante zuschneiden, Verlängern, Externe Geometrie, CarbonCopy, Konstruktionsmodus
- Skizzenbeschränkungen
- Geometrische Beschränkungen Koinzidenz erzwingen, Punkt auf Objekt festlegen, Vertikal, Horizontal, Parallel, Orthogonal, Tangente, Gleichheit, Symmetrisch, Constrain Block
- Dimensional constraints Sperren, Horizontaler Abstand, Vertikaler Abstand, Distanz festlegen, Radius festlegen, Winkel festlegen, Snell's Law, Umschalten auf steuernde Bemaßung,
- Sketcher tools Select solver DOFs, Close Shape, Connect Edges, Select Constraints, Select Origin, Select Vertical Axis, Select Horizontal Axis, Select Redundant Constraints, Select Conflicting Constraints, Select Elements Associated with constraints, Show/Hide internal geometry, Symmetry, Clone, Copy, Move, Rectangular Array, Delete All Geometry, Delete All Constraints
- Sketcher B-spline tools Show/Hide B-spline degree, Show/Hide B-spline control polygon, Show/Hide B-spline curvature comb, Show/Hide B-spline knot multiplicity, Convert Geometry to B-spline, Increase degree, Increase knot multiplicity, Decrease knot multiplicity
- Sketcher virtual space Switch Virtual Space
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Core: App DocumentObject
- Basic: App FeaturePython, App GeoFeature, Part Feature, Mesh Feature, Fem FemMeshObject
- Internal shapes: Part TopoShape, Mesh MeshObject, Fem FemMesh
- Structure: App DocumentObjectGroup (Std Group), App Part (Std Part), App Link (Std LinkMake)
- Derived: Part Part2DObject, Sketcher SketchObject, PartDesign Body, PartDesign Feature