Kreslení Facebinder
Draft_Facebinder |
Umístění Menu |
---|
Draft → Facebinder |
Pracovní stoly |
Kreslení, Architektura |
Výchozí zástupce |
F F |
Představen ve verzi |
- |
Viz také |
Nikdo |
Popis
Facebinder je velmi jednoduchý objekt zkonstruovaný z vybraných ploch jiných objektů. Je parametrický, můžete upravit původní objekt a objekt facebinder se úměrně změní. Tento objekt může být použit například pro vytváření vysunutí kolekce ploch z jiných objektů. Typické použití je v architektonickém designu, vytvoření objektu, který pokrývá několik zdí. Facebinder můžete po vytvoření posunovat a otáčet a všechno zůstává propojené s původními plochami
It can be used to create an extrusion from a collection of faces. This extrusion can for example represent a wall finish in architectural design.
Facebinder created from the faces of walls
Použití
- Vyberte plochy objektů (pro výběr několika ploch použijte CTRL)
- Stiskněte tlačítko Facebinder,nebo klávesy F, F
Properties
See also: Property editor.
A Draft Facebinder object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Draft
- ÚdajeArea (
Area
): (read-only) specifies the total area of the linked faces of the facebinder. - ÚdajeExtrusion (
Distance
): specifies the extrusion thickness of the facebinder. - ÚdajeFaces (
LinkSubList
): specifies the linked faces of the facebinder. - ÚdajeOffset (
Distance
): specifies an offset distance to apply between the facebinder and the original faces, prior to extrusion. - ÚdajeRemove Splitter (
Bool
): Specifies whether to remove splitter lines that divide co-planar faces of the facebinder. - ÚdajeSew (
Bool
): Specifies whether to perform a topological sewing operation on the facebinder.
View
Draft
- PohledPattern (
Enumeration
): specifies the Draft Pattern with which to fill the faces of the facebinder. This property only works if PohledDisplay Mode isFlat Lines
. - PohledPattern Size (
Float
): specifies the size of the Draft Pattern.
Scripting
Skriptování
Nástroj Facebinder může být použit ve skriptech Pythonu a v makrech použitím následující funkce:
facebinder = make_facebinder(selectionset)
- Vytvoří objekt facebinder z daného výběrového setu, což je seznam vybraných objektů, tak jak je vrací metoda FreeCADGui.Selection.getSelectionEx().
- Počítat se bude pouze s vybranými plochami.
- Vrací nově vytvořený objekt.
PropertyLinkSubList = [tuple1, tuple2, tuple3, ...]
PropertyLinkSubList = [(object1, list1), (object2, list2), (object3, list3), ...]
PropertyLinkSubList = [(object1, ['Face1', 'Face4', 'Face6']), ...]
PropertyLinkSubList = [(object1, ('Face1', 'Face4', 'Face6')), ...]
The thickness of the Facebinder can be added by overwriting its Extrusion
attribute; the value is entered in millimeters.
The placement of the Facebinder can be changed by overwriting its Placement
attribute, or by individually overwriting its Placement.Base
and Placement.Rotation
attributes.
Příklad:
import FreeCAD as App
import FreeCADGui as Gui
import Draft
doc = App.newDocument()
# Insert a solid box
box = doc.addObject("Part::Box", "Box")
box.Length = 2300
box.Width = 800
box.Height = 1000
# selection = Gui.Selection.getSelectionEx()
selection = [(box, ("Face1", "Face6"))]
facebinder = Draft.make_facebinder(selection)
facebinder.Extrusion = 50
doc.recompute()
facebinder.Placement.Base = App.Vector(1000, -1000, 100)
facebinder.ViewObject.ShapeColor = (0.99, 0.99, 0.4)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub