Esfera
Part Sphere |
Menu location |
---|
Part → Primitives → Sphere |
Workbenches |
Part |
Default shortcut |
None |
Introduced in version |
- |
See also |
Part Primitives |
Description
Creates a simple parametric sphere, with position, angle1, angle2, angle3 and radius parameters.
Usage
- Switch to the Part Workbench
- There are several ways to invoke the command:
Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
The sphere properties can later be edited, either in the property editor or by double-clicking on the sphere in the model tree.
Properties
The picture below gives an overview of a parametric sphere with parameters different from the default value.
- DadosRadius: Radius of the sphere
- DadosAngle 1: 1nd angle to cut / define the sphere
- DadosAngle 2: 2nd angle to cut / define the sphere
- DadosAngle 3: 3rd angle to cut / define the sphere
Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub