Draft: Livello
Livello |
Posizione nel menu |
---|
Draft → Utilità → Livello |
Ambiente |
Draft, Arch |
Avvio veloce |
Nessuno |
Introdotto nella versione |
0.19 |
Vedere anche |
Nessuno |
Descrizione
Il comando Draft Livello crea un livello Draft (Layer). Un livello è un tipo speciale di gruppo con un numero di proprietà visive. Queste proprietà e qualsiasi modifica apportata ad esse vengono propagate agli oggetti posizionati all'interno del livello. I livelli stessi vengono inseriti in un altro gruppo speciale: Draft LayerContainer.
Utilizzo
- Esistono diversi modi per richiamare il comando:
- Premere il pulsante Draft Livello.
- Selezionare l'opzione Utilities → Livello dal menu.
- Se il contenitore del livello esiste già: fare clic con il tasto destro del mouse nella Vista ad albero e selezionare l'opzione Aggiungi nuovo livello dal menu contestuale .
- Se non esiste, viene creato prima il contenitore del livello.
- Viene creato un livello e inserito nel contenitore del livello.
- Facoltativamente modificare le proprietà del livello.
- Facoltativamente, inserire gli oggetti nel livello trascinandoli sul livello nella Vista ad albero. Gli oggetti possono anche essere inseriti in un livello modificando la proprietà DatiGroup del livello.
- Facoltativamente attivare il livello.
Menu contestuale
Opzioni del contenitore di livelli
For a Draft LayerContainer these additional options are available in the Tree view context menu:
- The base label of a layer is its DatiLabel stripped of trailing digits and spaces. All layers with the same base label are merged into a single layer with the DatiLabel set to that base label.
Layer options
For a Draft Layer these additional options are available in the Tree view context menu:
- Activate this layer: activates the selected layer.
- Select layer contents: selects the objects inside the selected layer.
Drag and drop behavior
If you drop an object from a Std Group, or a group-like object such as an Arch BuildingPart, on a layer in the Tree view, it is not removed from the group, and vice versa. To remove an object from a layer it must be dropped on another layer or on the document node. There is no need to hold down the Ctrl key when dragging from or dropping on a layer.
Notes
- A new layer can also be created with the Draft AutoGroup command.
- The BIM Workbench offers a complete layer manager tool which will eventually be included in the Draft Workbench.
Proprietà
See also: Property editor.
A Draft Layer object is derived from an App FeaturePython object and inherits all its properties. It also has the following additional properties:
Data
Layer
- DatiGroup: specifica gli elementi che fanno parte del gruppo.
- Proprietà visive che possono essere modificate e propagate agli oggetti: VistaStile di disegno, VistaColore della linea, VistaLarghezza della linea, VistaColore della forma, VistaTrasparenza, e VistaVisibilità.
View
Layer
The properties in this section are applied to objects that are put inside the layer. And any changes to these properties are propagated to them. For two properties, VistaLine Color and VistaShape Color, this behavior is optional.
- VistaDraw Style (
Enumeration
): specifies the draw style of the layer:Solid
,Dashed
,Dotted
orDashdot
- VistaLine Color (
Color
): specifies the line color of the layer. - VistaLine Width (
Float
): specifies the line width of the layer. - VistaOverride Line Color Children (
Bool
): specifies if changes to the VistaLine Color of the layer are propagated to the objects inside the layer. - VistaOverride Shape Color Children (
Bool
): specifies if changes to the VistaShape Color of the layer are propagated to the objects inside the layer. - VistaShape Color (
Color
): specifies the shape color of the layer. - VistaTransparency (
Percent
): specifies the transparency of the layer.
- VistaLine Print Color (
Color
): specifies the line print color of the layer. - VistaUse Print Color (
Bool
): specifies if the VistaLine Print Color of the layer is used when a TechDraw DraftView is created from the objects inside the layer.
Script
Vedere anche: Script di base per FreeCAD
Per aggiungere o rimuovere oggetti dallo strato, sovrascrivere semplicemente il suo attributo Group
.
import FreeCAD as App
import Draft
doc = App.newDocument()
layer = Draft.make_layer(line_color=(1.0, 0.0, 0.0, 0.0),
shape_color=(1.0, 1.0, 0.0, 0.0))
polygon1 = Draft.make_polygon(5, radius=1000)
polygon2 = Draft.make_polygon(3, radius=500)
polygon3 = Draft.make_polygon(6, radius=220)
layer.Group = [polygon1, polygon2, polygon3]
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub