Tutorials: Difference between revisions
(remove column "unfinished" from table) |
(Removed spaces round pipes in pided links.) |
||
Line 195: | Line 195: | ||
<!-- Template for new entries |
<!-- Template for new entries |
||
|- |
|- |
||
| [[Tutorial |
| [[Tutorial|Tutorial]] |
||
| Topic |
| Topic |
||
| Level |
| Level |
||
Line 206: | Line 206: | ||
<!--T:36--> |
<!--T:36--> |
||
|- |
|- |
||
| [[Add_FEM_constraint_tutorial |
| [[Add_FEM_constraint_tutorial|Add FEM constraint tutorial]] |
||
| |
| |
||
| |
| |
||
Line 216: | Line 216: | ||
<!--T:37--> |
<!--T:37--> |
||
|- |
|- |
||
| [[Add_FEM_equation_tutorial |
| [[Add_FEM_equation_tutorial|Add FEM equation tutorial]] |
||
| |
| |
||
| |
| |
||
Line 226: | Line 226: | ||
<!--T:38--> |
<!--T:38--> |
||
|- |
|- |
||
| [[Aeroplane |
| [[Aeroplane|Aeroplane]] |
||
| Part Workbench |
| Part Workbench |
||
| Beginner |
| Beginner |
||
Line 236: | Line 236: | ||
<!--T:39--> |
<!--T:39--> |
||
|- |
|- |
||
| [[Analysis_of_reinforced_concrete_with_FEM |
| [[Analysis_of_reinforced_concrete_with_FEM|Analysis of reinforced concrete with FEM]] |
||
| Reinforced concrete with FEM |
| Reinforced concrete with FEM |
||
| Intermediate |
| Intermediate |
||
| 1:00 |
| 1:00 |
||
| [[User:HarryvL |
| [[User:HarryvL|HarryvL]] |
||
| 0.19 or above |
| 0.19 or above |
||
| |
| |
||
Line 246: | Line 246: | ||
<!--T:40--> |
<!--T:40--> |
||
|- |
|- |
||
| [[Arch_panel_tutorial |
| [[Arch_panel_tutorial|Arch panel tutorial]] |
||
| Modeling an architectural panel |
| Modeling an architectural panel |
||
| Beginner |
| Beginner |
||
Line 256: | Line 256: | ||
<!--T:41--> |
<!--T:41--> |
||
|- |
|- |
||
| [[Arch_tutorial |
| [[Arch_tutorial|Arch tutorial]] |
||
| Modeling |
| Modeling |
||
| Intermediate |
| Intermediate |
||
| |
| |
||
| [[User:Yorik |
| [[User:Yorik|Yorik]] |
||
| 0.14 |
| 0.14 |
||
| |
| |
||
Line 266: | Line 266: | ||
<!--T:106--> |
<!--T:106--> |
||
|- |
|- |
||
| [[Basic_Attachment_Tutorial |
| [[Basic_Attachment_Tutorial|Basic Attachment Tutorial]] |
||
| Sketch attachment |
| Sketch attachment |
||
| Beginner/intermediate |
| Beginner/intermediate |
||
| 01:00 |
| 01:00 |
||
| [[User:Bance |
| [[User:Bance|Bance]] |
||
| 0.17 and above |
| 0.17 and above |
||
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd] |
| [https://github.com/BanceFC/Examples/blob/master/Basic_Attachment_Tutorial.FCStd Basic Attachment Tutorial.FCStd] |
||
Line 276: | Line 276: | ||
<!--T:42--> |
<!--T:42--> |
||
|- |
|- |
||
| [[Basic_modeling_tutorial |
| [[Basic_modeling_tutorial|Basic modeling tutorial]] |
||
| Introduction to modelling |
| Introduction to modelling |
||
| Beginner |
| Beginner |
||
| 0:15 |
| 0:15 |
||
| [[User:NormandC |
| [[User:NormandC|NormandC]] |
||
| Any |
| Any |
||
| None |
| None |
||
Line 286: | Line 286: | ||
<!--T:44--> |
<!--T:44--> |
||
|- |
|- |
||
| [[Basic_Part_Design_Tutorial |
| [[Basic_Part_Design_Tutorial|Basic Part Design Tutorial]] |
||
| Modeling |
| Modeling |
||
| Beginner |
| Beginner |
||
| |
| |
||
| [[User:Quick61 |
| [[User:Quick61|Mark Stephen (Quick61)]] and [[User:HarryGeier|HarryGeier]] |
||
| 0.17 or above |
| 0.17 or above |
||
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17] |
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17] |
||
Line 296: | Line 296: | ||
<!--T:45--> |
<!--T:45--> |
||
|- |
|- |
||
| [[Basic_Sketcher_Tutorial |
| [[Basic_Sketcher_Tutorial|Basic Sketcher Tutorial]] |
||
| Sketcher |
| Sketcher |
||
| Beginner |
| Beginner |
||
| 1:00 |
| 1:00 |
||
| [[User:Drei |
| [[User:Drei|Drei]] and [[User:Vocx|Vocx]] |
||
| 0.19 |
| 0.19 |
||
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ] |
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43594 Basic Sketcher tutorial ] |
||
Line 306: | Line 306: | ||
<!--T:46--> |
<!--T:46--> |
||
|- |
|- |
||
| [[Basic_TechDraw_Tutorial |
| [[Basic_TechDraw_Tutorial|Basic TechDraw Tutorial]] |
||
| TechDraw Workbench |
| TechDraw Workbench |
||
| Beginner |
| Beginner |
||
| |
| |
||
| [[User:WandererFan |
| [[User:WandererFan|WandererFan]] |
||
| 0.17 and above |
| 0.17 and above |
||
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample] |
| [https://github.com/FreeCAD/Examples/blob/master/Basic_Part_Design_Tutorial_Example_017_Files/Basic_Part_Design_Tutorial_017.fcstd Basic Part Design for v0.17 Sample] [https://github.com/FreeCAD/Examples/blob/master/Basic_TechDraw_Tutorial_Example_Files/Basic_TechDraw_Tutorial.fcstd Basic TechDraw Tutorial Sample] |
||
Line 316: | Line 316: | ||
<!--T:47--> |
<!--T:47--> |
||
|- |
|- |
||
| [[Code_snippets |
| [[Code_snippets|Code snippets]] |
||
| Python |
| Python |
||
| Beginner |
| Beginner |
||
Line 326: | Line 326: | ||
<!--T:48--> |
<!--T:48--> |
||
|- |
|- |
||
| [[Creating_a_simple_part_with_PartDesign |
| [[Creating_a_simple_part_with_PartDesign|Creating a simple part with PartDesign]] |
||
| Modeling |
| Modeling |
||
| Beginner |
| Beginner |
||
Line 336: | Line 336: | ||
<!--T:49--> |
<!--T:49--> |
||
|- |
|- |
||
| [[Customize_Toolbars |
| [[Customize_Toolbars|Customize Toolbars]] |
||
| |
| |
||
| Beginner |
| Beginner |
||
| 0:05 |
| 0:05 |
||
| [[User:Mario52 |
| [[User:Mario52|Mario52]] |
||
| Any |
| Any |
||
| None |
| None |
||
Line 346: | Line 346: | ||
<!--T:50--> |
<!--T:50--> |
||
|- |
|- |
||
| [[Draft_ShapeString_tutorial |
| [[Draft_ShapeString_tutorial|Draft ShapeString tutorial]] |
||
| Product Design |
| Product Design |
||
| Beginner |
| Beginner |
||
Line 356: | Line 356: | ||
<!--T:51--> |
<!--T:51--> |
||
|- |
|- |
||
| [[Draft_tutorial |
| [[Draft_tutorial|Draft tutorial]] |
||
| Drafting |
| Drafting |
||
| Beginner |
| Beginner |
||
| 0:30 |
| 0:30 |
||
| [[User:Drei |
| [[User:Drei|Drei]] and vocx |
||
| 0.19 |
| 0.19 |
||
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated] |
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=43651 Draft tutorial updated] |
||
Line 366: | Line 366: | ||
<!--T:53--> |
<!--T:53--> |
||
|- |
|- |
||
| [[Drawing_Template_HowTo |
| [[Drawing_Template_HowTo|Drawing Template HowTo (obsolete)]] |
||
| 2D Drafting |
| 2D Drafting |
||
| Intermediate |
| Intermediate |
||
| 1:00 |
| 1:00 |
||
| [[User:Quick61 |
| [[User:Quick61|Mark Stephen (Quick61)]] |
||
| 0.14.3700 or above |
| 0.14.3700 or above |
||
| None |
| None |
||
Line 376: | Line 376: | ||
<!--T:54--> |
<!--T:54--> |
||
|- |
|- |
||
| [[Drawing_tutorial |
| [[Drawing_tutorial|Drawing tutorial (obsolete)]] |
||
| Blueprints / Drawings |
| Blueprints / Drawings |
||
| Beginner |
| Beginner |
||
| 0:15 |
| 0:15 |
||
| [[User:Drei |
| [[User:Drei|Drei]] |
||
| 0.16 or above |
| 0.16 or above |
||
| |
| |
||
Line 386: | Line 386: | ||
<!--T:55--> |
<!--T:55--> |
||
|- |
|- |
||
| [[Dxf_Importer_Install |
| [[Dxf_Importer_Install|Dxf Importer Install]] |
||
| |
| |
||
| Intermediate |
| Intermediate |
||
| 0:05 |
| 0:05 |
||
| [[User:Mario52 |
| [[User:Mario52|Mario52]] |
||
| Any |
| Any |
||
| None |
| None |
||
Line 396: | Line 396: | ||
<!--T:56--> |
<!--T:56--> |
||
|- |
|- |
||
| [[Engine_Block_Tutorial |
| [[Engine_Block_Tutorial|Engine Block Tutorial]] |
||
| Part Workbench |
| Part Workbench |
||
| Beginner |
| Beginner |
||
Line 406: | Line 406: | ||
<!--T:57--> |
<!--T:57--> |
||
|- |
|- |
||
| [[Export_to_STL_or_OBJ |
| [[Export_to_STL_or_OBJ|Export to STL or OBJ]] |
||
| Export to STL or OBJ |
| Export to STL or OBJ |
||
| Beginner |
| Beginner |
||
Line 416: | Line 416: | ||
<!--T:58--> |
<!--T:58--> |
||
|- |
|- |
||
| [[Extend_FEM_Module |
| [[Extend_FEM_Module|Extend FEM Module]] |
||
| |
| |
||
| |
| |
||
| |
| |
||
| [[User:M42kus |
| [[User:M42kus|M42kus]] |
||
| |
| |
||
| |
| |
||
Line 426: | Line 426: | ||
<!--T:59--> |
<!--T:59--> |
||
|- |
|- |
||
| [[FEM_Beginner_tutorial |
| [[FEM_Beginner_tutorial|FEM Beginner tutorial]] |
||
| FEM Beginner tutorial |
| FEM Beginner tutorial |
||
| Beginner |
| Beginner |
||
Line 436: | Line 436: | ||
<!--T:60--> |
<!--T:60--> |
||
|- |
|- |
||
| [[FEM_CalculiX_Cantilever_3D |
| [[FEM_CalculiX_Cantilever_3D|FEM CalculiX Cantilever 3D]] |
||
| Finite Element Analysis |
| Finite Element Analysis |
||
| Beginner |
| Beginner |
||
| 0:10 |
| 0:10 |
||
| [[User:Bernd |
| [[User:Bernd|Bernd]] |
||
| 0.16.6377 or above |
| 0.16.6377 or above |
||
| |
| |
||
Line 446: | Line 446: | ||
<!--T:61--> |
<!--T:61--> |
||
|- |
|- |
||
| [[FEM_Shear_of_a_Composite_Block |
| [[FEM_Shear_of_a_Composite_Block|FEM Shear of a Composite Block]] |
||
| Finite Element Analysis |
| Finite Element Analysis |
||
| Beginner/Intermediate |
| Beginner/Intermediate |
||
| 0:300 |
| 0:300 |
||
| [[User:HarryvL |
| [[User:HarryvL|HarryvL]] |
||
| 0.17.12960 or above |
| 0.17.12960 or above |
||
| |
| |
||
Line 456: | Line 456: | ||
<!--T:62--> |
<!--T:62--> |
||
|- |
|- |
||
| [[FEM_tutorial |
| [[FEM_tutorial|FEM tutorial]] |
||
| Finite Element Analysis |
| Finite Element Analysis |
||
| Beginner |
| Beginner |
||
| 0:10 |
| 0:10 |
||
| [[User:Drei |
| [[User:Drei|Drei]] |
||
| 0.16.6700 or above |
| 0.16.6700 or above |
||
| |
| |
||
Line 466: | Line 466: | ||
<!--T:63--> |
<!--T:63--> |
||
|- |
|- |
||
| [[FEM_Tutorial_Python |
| [[FEM_Tutorial_Python|FEM Tutorial Python]] |
||
| Finite Element Analysis |
| Finite Element Analysis |
||
| Intermediate |
| Intermediate |
||
| 0:30 |
| 0:30 |
||
| [[User:Bernd |
| [[User:Bernd|Bernd]] |
||
| 0.18.15985 or above |
| 0.18.15985 or above |
||
| |
| |
||
Line 476: | Line 476: | ||
<!--T:64--> |
<!--T:64--> |
||
|- |
|- |
||
| [[FreeCAD-Ship_s60_tutorial |
| [[FreeCAD-Ship_s60_tutorial|FreeCAD-Ship s60 tutorial]] |
||
| Ship Workbench |
| Ship Workbench |
||
| Beginner |
| Beginner |
||
Line 486: | Line 486: | ||
<!--T:65--> |
<!--T:65--> |
||
|- |
|- |
||
| [[FreeCAD-Ship_s60_tutorial_(II) |
| [[FreeCAD-Ship_s60_tutorial_(II)|FreeCAD-Ship s60 tutorial (II)]] |
||
| Ship Workbench |
| Ship Workbench |
||
| Beginner |
| Beginner |
||
Line 496: | Line 496: | ||
<!--T:66--> |
<!--T:66--> |
||
|- |
|- |
||
| [[How_to_install_additional_workbenches |
| [[How_to_install_additional_workbenches|How to install additional workbenches]] |
||
| Programming |
| Programming |
||
| Medium programmer |
| Medium programmer |
||
| 0:15 |
| 0:15 |
||
| [[User:R-frank |
| [[User:R-frank|r-frank]] |
||
| Any |
| Any |
||
| None |
| None |
||
Line 506: | Line 506: | ||
<!--T:67--> |
<!--T:67--> |
||
|- |
|- |
||
| [[How_to_install_macros |
| [[How_to_install_macros|How to install macros]] |
||
| Programming |
| Programming |
||
| Medium programmer |
| Medium programmer |
||
| 0:15 |
| 0:15 |
||
| [[User:Mario52 |
| [[User:Mario52|Mario52]] |
||
| Any |
| Any |
||
| None |
| None |
||
Line 516: | Line 516: | ||
<!--T:68--> |
<!--T:68--> |
||
|- |
|- |
||
| [[Import_from_STL_or_OBJ |
| [[Import_from_STL_or_OBJ|Import from STL or OBJ]] |
||
| Import from STL or OBJ |
| Import from STL or OBJ |
||
| Beginner |
| Beginner |
||
Line 526: | Line 526: | ||
<!--T:69--> |
<!--T:69--> |
||
|- |
|- |
||
| [[Import_OpenSCAD_code |
| [[Import_OpenSCAD_code|Import OpenSCAD code]] |
||
| Import OpenSCAD code |
| Import OpenSCAD code |
||
| Beginner |
| Beginner |
||
Line 536: | Line 536: | ||
<!--T:70--> |
<!--T:70--> |
||
|- |
|- |
||
| [[Import_text_and_geometry_from_Inkscape |
| [[Import_text_and_geometry_from_Inkscape|Import text and geometry from Inkscape]] |
||
| Import text and geometry from Inkscape |
| Import text and geometry from Inkscape |
||
| Beginner |
| Beginner |
||
Line 546: | Line 546: | ||
<!--T:114--> |
<!--T:114--> |
||
|- |
|- |
||
| [[Import/Export_IFC_-_compiling_IfcOpenShell |
| [[Import/Export_IFC_-_compiling_IfcOpenShell|Import/Export IFC - compiling IfcOpenShell]] |
||
| Arch Workbench |
| Arch Workbench |
||
| Advanced |
| Advanced |
||
Line 556: | Line 556: | ||
<!--T:71--> |
<!--T:71--> |
||
|- |
|- |
||
| [[Measurement_Of_Angles_On_Holes |
| [[Measurement_Of_Angles_On_Holes|Measurement Of Angles On Holes]] |
||
| TechDraw Workbench |
| TechDraw Workbench |
||
| Beginner |
| Beginner |
||
Line 566: | Line 566: | ||
<!--T:109--> |
<!--T:109--> |
||
|- |
|- |
||
| [[PartDesign_Bearingholder_Tutorial_I |
| [[PartDesign_Bearingholder_Tutorial_I|PartDesign Bearingholder Tutorial I]] |
||
| Product design - Bearingholder #1 |
| Product design - Bearingholder #1 |
||
| Beginner |
| Beginner |
||
Line 576: | Line 576: | ||
<!--T:110--> |
<!--T:110--> |
||
|- |
|- |
||
| [[PartDesign_Bearingholder_Tutorial_II |
| [[PartDesign_Bearingholder_Tutorial_II|PartDesign Bearingholder Tutorial II]] |
||
| Product design - Bearingholder #2 |
| Product design - Bearingholder #2 |
||
| Beginner |
| Beginner |
||
Line 586: | Line 586: | ||
<!--T:72--> |
<!--T:72--> |
||
|- |
|- |
||
| [[PartDesign_tutorial |
| [[PartDesign_tutorial|PartDesign tutorial]] |
||
| Sketcher |
| Sketcher |
||
| Beginner |
| Beginner |
||
| 0:15 |
| 0:15 |
||
| [[User:Drei |
| [[User:Drei|Drei]] |
||
| 0.16 or above |
| 0.16 or above |
||
| |
| |
||
Line 596: | Line 596: | ||
<!--T:77--> |
<!--T:77--> |
||
|- |
|- |
||
| [[Path_Walkthrough_for_the_Impatient |
| [[Path_Walkthrough_for_the_Impatient|Path Walkthrough for the Impatient]] |
||
| Path Workbench |
| Path Workbench |
||
| |
| |
||
Line 606: | Line 606: | ||
<!--T:78--> |
<!--T:78--> |
||
|- |
|- |
||
| [[Plot_Basic_tutorial |
| [[Plot_Basic_tutorial|Plot Basic tutorial]] |
||
| Plot Workbench Basic Tutorial |
| Plot Workbench Basic Tutorial |
||
| Beginner |
| Beginner |
||
Line 616: | Line 616: | ||
<!--T:79--> |
<!--T:79--> |
||
|- |
|- |
||
| [[Plot_MultiAxes_tutorial |
| [[Plot_MultiAxes_tutorial|Plot MultiAxes tutorial]] |
||
| Plot workbench |
| Plot workbench |
||
| Intermediate |
| Intermediate |
||
Line 626: | Line 626: | ||
<!--T:80--> |
<!--T:80--> |
||
|- |
|- |
||
| [[Post-Processing_of_FEM_Results_with_Paraview |
| [[Post-Processing_of_FEM_Results_with_Paraview|Post-Processing of FEM Results with Paraview]] |
||
| Post-Processing of FEM Results with ParaView |
| Post-Processing of FEM Results with ParaView |
||
| Intermediate |
| Intermediate |
||
| 2:00 |
| 2:00 |
||
| [[User:HarryvL |
| [[User:HarryvL|HarryvL]] |
||
| 0.19 |
| 0.19 |
||
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall] |
| [https://forum.freecadweb.org/download/file.php?id=103403 Beam] and [https://forum.freecadweb.org/download/file.php?id=103557 wall] |
||
Line 636: | Line 636: | ||
<!--T:81--> |
<!--T:81--> |
||
|- |
|- |
||
| [[Python_scripting_tutorial |
| [[Python_scripting_tutorial|Python scripting tutorial]] |
||
| Programming |
| Programming |
||
| Intermediate |
| Intermediate |
||
Line 646: | Line 646: | ||
<!--T:82--> |
<!--T:82--> |
||
|- |
|- |
||
| [[Raytracing_tutorial |
| [[Raytracing_tutorial|Raytracing tutorial]] |
||
| Raytracing |
| Raytracing |
||
| Beginner |
| Beginner |
||
| 0:010 |
| 0:010 |
||
| [[User:Drei |
| [[User:Drei|Drei]] |
||
| 0.16 or above |
| 0.16 or above |
||
| |
| |
||
Line 656: | Line 656: | ||
<!--T:83--> |
<!--T:83--> |
||
|- |
|- |
||
| [[Robot_6-Axis |
| [[Robot_6-Axis|Robot 6-Axis]] |
||
| Robot Workbench |
| Robot Workbench |
||
| Intermediate |
| Intermediate |
||
Line 666: | Line 666: | ||
<!--T:84--> |
<!--T:84--> |
||
|- |
|- |
||
| [[Robot_tutorial |
| [[Robot_tutorial|Robot tutorial]] |
||
| Robot Workbench |
| Robot Workbench |
||
| Beginner |
| Beginner |
||
Line 676: | Line 676: | ||
<!--T:85--> |
<!--T:85--> |
||
|- |
|- |
||
| [[Scripted_Parts:_Ball_Bearing_-_Part_1 |
| [[Scripted_Parts:_Ball_Bearing_-_Part_1|Scripted Parts: Ball Bearing - Part 1]] |
||
| Part Scripting - Ball Bearing #1 |
| Part Scripting - Ball Bearing #1 |
||
| Beginner |
| Beginner |
||
Line 686: | Line 686: | ||
<!--T:86--> |
<!--T:86--> |
||
|- |
|- |
||
| [[Scripted_Parts:_Ball_Bearing_-_Part_2 |
| [[Scripted_Parts:_Ball_Bearing_-_Part_2|Scripted Parts: Ball Bearing - Part 2]] |
||
| Part Scripting - Ball Bearing #2 |
| Part Scripting - Ball Bearing #2 |
||
| Beginner |
| Beginner |
||
Line 696: | Line 696: | ||
<!--T:87--> |
<!--T:87--> |
||
|- |
|- |
||
| [[Scripts |
| [[Scripts|Scripts]] |
||
| Scripting |
| Scripting |
||
| Beginner |
| Beginner |
||
Line 706: | Line 706: | ||
<!--T:89--> |
<!--T:89--> |
||
|- |
|- |
||
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices |
| [[Sketcher_Micro_Tutorial_-_Constraint_Practices|Sketcher Micro Tutorial - Constraint Practices]] |
||
| Sketcher |
| Sketcher |
||
| Beginner |
| Beginner |
||
| 0:30 |
| 0:30 |
||
| [[User:Quick61 |
| [[User:Quick61|Mark Stephen (Quick61)]] and vocx |
||
| 0.19 |
| 0.19 |
||
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices] |
| [https://forum.freecadweb.org/viewtopic.php?f=36&p=371659#p371659 Sketcher Constraints practices] |
||
Line 716: | Line 716: | ||
<!--T:90--> |
<!--T:90--> |
||
|- |
|- |
||
| [[Sketcher_reference |
| [[Sketcher_reference|Sketcher reference]] |
||
| |
| |
||
| |
| |
||
Line 726: | Line 726: | ||
<!--T:91--> |
<!--T:91--> |
||
|- |
|- |
||
| [[Sketcher_requirement_for_a_sketch |
| [[Sketcher_requirement_for_a_sketch|Sketcher requirement for a sketch]] |
||
| Sketcher |
| Sketcher |
||
| Beginner |
| Beginner |
||
| |
| |
||
| [[User:Maker |
| [[User:Maker|Maker]] |
||
| |
| |
||
| None |
| None |
||
Line 736: | Line 736: | ||
<!--T:92--> |
<!--T:92--> |
||
|- |
|- |
||
| [[Sketcher_Tutorial |
| [[Sketcher_Tutorial|Sketcher Tutorial]] |
||
| Sketcher |
| Sketcher |
||
| Beginner |
| Beginner |
||
Line 746: | Line 746: | ||
<!--T:115--> |
<!--T:115--> |
||
|- |
|- |
||
| [[TechDraw_pitch_circle_tutorial |
| [[TechDraw_pitch_circle_tutorial|TechDraw pitch circle tutorial]] |
||
| TechDraw Workbench |
| TechDraw Workbench |
||
| Beginner |
| Beginner |
||
Line 756: | Line 756: | ||
<!--T:93--> |
<!--T:93--> |
||
|- |
|- |
||
| [[TechDraw_TemplateHowTo |
| [[TechDraw_TemplateHowTo|TechDraw TemplateHowTo]] |
||
| TechDraw Workbench |
| TechDraw Workbench |
||
| Intermediate |
| Intermediate |
||
Line 766: | Line 766: | ||
<!--T:94--> |
<!--T:94--> |
||
|- |
|- |
||
| [[Thread_for_Screw_Tutorial |
| [[Thread_for_Screw_Tutorial|Thread for Screw Tutorial]] |
||
| Product design |
| Product design |
||
| Advanced |
| Advanced |
||
| 1:00 |
| 1:00 |
||
| [[User:DeepSOIC |
| [[User:DeepSOIC|DeepSOIC]], [[User:Murdic|Murdic]], vocx |
||
| 0.19 |
| 0.19 |
||
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial] |
| [https://forum.freecadweb.org/viewtopic.php?f=36&t=44668 Updated: Thread for screw tutorial] |
||
Line 776: | Line 776: | ||
<!--T:95--> |
<!--T:95--> |
||
|- |
|- |
||
| [[Toothbrush_Head_Stand |
| [[Toothbrush_Head_Stand|Toothbrush Head Stand]] |
||
| Modeling |
| Modeling |
||
| Beginner |
| Beginner |
||
| 1:00 |
| 1:00 |
||
| [[User:EmmanuelG |
| [[User:EmmanuelG|EmmanuelG]] |
||
| 0.16 or greater |
| 0.16 or greater |
||
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310] |
| [https://www.thingiverse.com/thing:2403310 Thingiverse 2403310] |
||
Line 786: | Line 786: | ||
<!--T:96--> |
<!--T:96--> |
||
|- |
|- |
||
| [[Topological_data_scripting |
| [[Topological_data_scripting|Topological data scripting]] |
||
| Programming |
| Programming |
||
| Intermediate |
| Intermediate |
||
Line 796: | Line 796: | ||
<!--T:97--> |
<!--T:97--> |
||
|- |
|- |
||
| [[Transient_FEM_analysis |
| [[Transient_FEM_analysis|Transient FEM analysis]] |
||
| Transient FEM analysis |
| Transient FEM analysis |
||
| |
| |
||
Line 806: | Line 806: | ||
<!--T:98--> |
<!--T:98--> |
||
|- |
|- |
||
| [[Tutorial_custom_placing_of_windows_and_doors |
| [[Tutorial_custom_placing_of_windows_and_doors|Tutorial custom placing of windows and doors]] |
||
| Architecture |
| Architecture |
||
| Intermediate |
| Intermediate |
||
| 1:00 |
| 1:00 |
||
| [[User:Vocx |
| [[User:Vocx|Vocx]] |
||
| 0.18 or above |
| 0.18 or above |
||
| None |
| None |
||
Line 816: | Line 816: | ||
<!--T:99--> |
<!--T:99--> |
||
|- |
|- |
||
| [[Tutorial_for_open_windows |
| [[Tutorial_for_open_windows|Tutorial for open windows]] |
||
| Architecture |
| Architecture |
||
| Beginner |
| Beginner |
||
| 1:00 |
| 1:00 |
||
| [[User:Vocx |
| [[User:Vocx|Vocx]] |
||
| 0.18 or above |
| 0.18 or above |
||
| None |
| None |
||
Line 826: | Line 826: | ||
<!--T:100--> |
<!--T:100--> |
||
|- |
|- |
||
| [[Tutorial_FreeCAD_POV_ray |
| [[Tutorial_FreeCAD_POV_ray|Tutorial FreeCAD POV ray]] |
||
| Rendering |
| Rendering |
||
| Intermediate |
| Intermediate |
||
| 2:00 |
| 2:00 |
||
| [[User:Vocx |
| [[User:Vocx|Vocx]] |
||
| 0.18 or above |
| 0.18 or above |
||
| None |
| None |
||
Line 836: | Line 836: | ||
<!--T:101--> |
<!--T:101--> |
||
|- |
|- |
||
| [[Tutorial_Render_with_Blender |
| [[Tutorial_Render_with_Blender|Tutorial Render with Blender]] |
||
| Rendering |
| Rendering |
||
| Intermediate |
| Intermediate |
||
| 1:00 |
| 1:00 |
||
| [[User:Vocx |
| [[User:Vocx|Vocx]] |
||
| 0.18 or above |
| 0.18 or above |
||
| None |
| None |
||
Line 846: | Line 846: | ||
<!--T:102--> |
<!--T:102--> |
||
|- |
|- |
||
| [[VRML_Preparation_for_Robot_Simulation |
| [[VRML_Preparation_for_Robot_Simulation|VRML Preparation for Robot Simulation]] |
||
| Robot Workbench |
| Robot Workbench |
||
| Intermediate |
| Intermediate |
||
Line 856: | Line 856: | ||
<!--T:103--> |
<!--T:103--> |
||
|- |
|- |
||
| [[Washers |
| [[Washers|Washers]] |
||
| |
| |
||
| |
| |
||
Line 866: | Line 866: | ||
<!--T:104--> |
<!--T:104--> |
||
|- |
|- |
||
| [[Whiffle_Ball_tutorial |
| [[Whiffle_Ball_tutorial|Whiffle Ball tutorial]] |
||
| Product design |
| Product design |
||
| Beginner |
| Beginner |
||
Line 876: | Line 876: | ||
<!--T:105--> |
<!--T:105--> |
||
|- |
|- |
||
| [[Wikihouse_porting_tutorial |
| [[Wikihouse_porting_tutorial|Wikihouse porting tutorial]] |
||
| Wikihouse porting tutorial |
| Wikihouse porting tutorial |
||
| Intermediate/Advanced |
| Intermediate/Advanced |
Revision as of 19:41, 18 October 2021
This page presents a selection of high quality written tutorials. A complete, unsorted list of tutorials can be found in Category:Tutorials, a complete and sortable one can be found in the table below.
Also visit video tutorials and offsite tutorials for tutorials hosted on external sites. A useful source of video tutorials is YouTube.
If you'd like to contribute with writing wiki documentation and tutorials, see the general wiki guidelines in WikiPages, and read the tutorial guidelines.
Please notice the version of FreeCAD used in the tutorial as some tutorials may use an old version of the program. Although the general modelling process may still work, some tools may have changed.
Architecture and BIM
-
Arch tutorial (v0.14)
This is the essential introduction to the Arch Workbench. It is extensive and showcases a typical workflow, from importing plans in DXF format to building the 3D model. -
BIM modeling
How to model a small house, produce a blueprint with TechDraw, and export to IFC. -
Open windows and doors (v0.18)
How to display windows and doors as open, with elevation and plan symbols, and produce a basic floor plan with TechDraw. -
Design custom windows (v0.18)
How to draw custom doors and windows using the Sketcher, and adjust their normals to correctly place them in walls. -
Arch panel tutorial (v0.15)
Modeling a microhouse roof panel by using the Sketcher, the Window tool, and the Panel tool. -
WikiHouse modelling
Re-modeling the WikiHouse project using sketches and panels, starting from importing a mesh model created in SketchUp.
Modeling parts
FreeCAD provides two main workflows to modeling parts:
- combining objects, a method called Constructive solid geometry (CSG) using the Part Workbench, and
- using parametric modelling and feature editing with the PartDesign Workbench.
Please note that the PartDesign Workbench workflow was considerably changed from FreeCAD 0.17 onward; some of the tutorials haven't been updated and may refer to the 0.16 version.
-
Creating a simple part with PartDesign (v0.17)
An introduction to the PartDesign workflow: tracing a sketch, using pad, pocket, and moving the object. -
Basic Part Design Tutorial (v0.17)
Model a simple part using a feature editing methodology: creating a sketch, using pad, external references, pocket, and mirror. -
Model an electric toothbrush head stand (v0.16)
Multiple features used: sketch, distance and coincident constraints, pad, external references, fillet, chamfer, linear pattern, and draft. -
Modeling for product design (v0.16)
Modeling a Lego block: sketches, vertical and horizontal distance constraints, pad, pocket, external reference, linear pattern, and assembly. -
Traditional modeling, the CSG way
Modeling a table by using simple solids like cubes and cylinders, and performing boolean operations (fusions and cuts) with them. -
Draft ShapeString tutorial (v0.19)
Create engraved text on a solid: extrude a shapestring to make it solid, then use a boolean cut to carve it from another solid. -
Create a wiffle ball (v0.19)
Use solid primitives, like cubes and cylinders, and boolean operations, like union and cut, to create a hollowed ball. -
Basic modeling tutorial
Create an iron angle by two methods: using solid primitives, and boolean operations (CSG); and by extruding a planar profile. -
Aeroplane tutorial
Understand placements in FreeCAD by creating a simple aeroplane model. Then learn about rotation angles, yaw (Z), pitch (Y), and roll (X). -
Thread for screw tutorial (v0.19)
Understand how to create threads with several techniques that include use of the tools Part Helix, PartDesign AdditivePipe, Part Sweep, Part Fuse, and Part Cut.
The Raspberry Pi project has made simple tutorials that are easy to follow, particularly for those new to CAD systems:
- freecad-dice, model a die with six faces, and optionally 3D print it.
- freecad-headphone-tidy, model a spool to organize and store earphones, and optionally 3D print it.
- freecad-chess-set, model and entire chess set in Bauhaus modernist style.
- raspberrypilearning repository (CC-BY 4.0) with other examples.
Drafting and Sketching
-
Traditional 2D drafting
Draw a floor plan with lines, wires, rectangles, circular arcs, and add hatch patterns, annotations, and dimensions. Export the result to DXF. -
Draft tutorial (v0.19)
This is a basic introduction to the tools of the Draft Workbench: working plane, grid, line, arc, upgrade, rectangle, circle, polygon, arrays, dimensions, annotations, and shapestring. -
Sketcher reference (v0.18)
This is a 70-page long PDF document that serves as a detailed manual for the Sketcher Workbench. It explains the basics of Sketcher usage, and goes into a lot of detail about the creation of geometrical shapes, and each of the constraints. -
Basic Sketcher Tutorial (v0.19)
This is a basic introduction to the tools of the Sketcher Workbench: construction mode, line, circle, arc, constraints (equality, vertical, horizontal, tangential, distance, angle, radius). -
Sketcher constraints practices (v0.19)
Learn to efficiently constrain a sketch. Prefer geometric constraints over datum constraints.
Technical Drawings
-
Basic TechDraw Tutorial (v0.17)
This is the essential introduction to the tools of the TechDraw Workbench: page, view, scale, vertical and horizontal dimensions, annotations, projection groups, linking dimensions to the 3D view. -
Creating a new background template (v0.17)
Instructions to create a page template in Inkscape for using it with the TechDraw Workbench. Determine the size of the sheet, draw a frame for the page, define fixed text, and editable text fields. -
Measurement Of Angles On Holes (v0.19)
Instructions for adding center lines and subsequent angle representations on holes.
FEM
-
CalculiX cantilever FEM analysis (v0.17)
This in an example included in every installation of FreeCAD; it demonstrates a basic analysis with the CalculiX FE solver. Purge the current result, re-run the solver, and view the displacements and stresses in the deformed mesh in the viewport. -
Simple FEM introduction (v0.17)
This is a short introduction to the steps required to perform an analysis in the FEM Workbench: model your object, create a mesh, add constraints and forces, add a material, run the solver, and visualize the results. -
FEM shear analysis of a composite block (v0.17)
Study the deformation of a block made of a hard nucleus surrounded by a softer material: create mesh regions, add materials, set up sliding constraints, add shear loads, run the solver, and visualize the results with a clip plane. -
Analysis of reinforced concrete with FEM (v0.19)
Estimate the level of reinforcement required in a concrete structure to prevent brittle failure under tension or shear. -
Post-Processing of FEM results with Paraview (v0.19)
This tutorial explains the basics of transferring data from the FEM Workbench to Paraview and shows some of the options and settings for displaying data.
CNC & 3D Printing
-
Path Workbench for the impatient
This is a quick presentation of the workflow for the Path Workbench: create a job, define the output, define the milling tool, define the path operations, start the simulation, and generate a G-code output file. -
Preparing models for 3D printing (v0.16)
Convert a solid object to a mesh object using the Mesh Workbench, export the mesh to STL format, and use Slic3r to prepare the G-code. Alternatively use the Cura Workbench or the Path Workbench to generate the G-code.
Rendering
-
Creating renderings
Quickly produce a rendered image of your bodies with POV-Ray and LuxRender, if they are installed in your system. -
Raytracing tutorial (v0.16)
Describes the basic workflow of the Raytracing Workbench using POV-Ray or LuxRender: set the path to the renderers, create a project, set the camera position, select the model, run the renderer. -
Intermediate FreeCAD and POV-ray tutorial (v0.18)
Workflow to produce a better render with POV-Ray: create a project, add objects, set the camera, save the .pov file, manually edit the file to improve the textures, planes, lights, and then run the renderer. -
Rendering a FreeCAD assembly with Blender (v0.18)
Export bodies from FreeCAD to Wavefront .obj, import the file into Blender, set up a simple Sun light, assign basic materials with the Principled BSDF shader, and produce a rendered image with EEVEE and Cycles.
Robot workbench
-
Robot tutorial (v0.17)
Simulate the movement of an industrial robot: set up a trajectory, set up home position, change the robot position, insert various waypoints, and simulate the robot movement.
Plotting
-
Basic plot
Draw simple mathematical functions in the Plot Workbench using the underlying Python plotting libraries: define the input list (X), two output lists (Y1, Y2), plot the functions (Y1 and Y2 against X), set the grid, line styles, legends, axes labels, plot title, and save the plot. -
Multiaxes plot
Draw a more complicated plot in the Plot Workbench with two different input lists (X, T), and three output lists (Y1, Y2, Y3), then create two sets of axes in the same plot, and plot the pairs of lists (Y1 against X, and Y2 and Y3 against T); set the axes labels and grid, and move the legends and title.
Scripting
These are tutorials that are related to scripting or programming. They are geared towards more experienced users, who are already somewhat familiar with the program.
Tutorials - Comprehensive list
Here are listed all the tutorials that are not in the manual regardless of their quality. If a tutorial is listed in the Category:Tutorials and not in this table please insert it.
Tutorial | Topic | Level | Time to complete hh:mm | Authors | FreeCAD version | Example files
|
---|---|---|---|---|---|---|
Add FEM constraint tutorial | M42kus | |||||
Add FEM equation tutorial | JohnWang | |||||
Aeroplane | Part Workbench | Beginner | 0:10 | Hughthecat | ||
Analysis of reinforced concrete with FEM | Reinforced concrete with FEM | Intermediate | 1:00 | HarryvL | 0.19 or above | |
Arch panel tutorial | Modeling an architectural panel | Beginner | 1:00 | Yorik | ||
Arch tutorial | Modeling | Intermediate | Yorik | 0.14 | ||
Basic Attachment Tutorial | Sketch attachment | Beginner/intermediate | 01:00 | Bance | 0.17 and above | Basic Attachment Tutorial.FCStd |
Basic modeling tutorial | Introduction to modelling | Beginner | 0:15 | NormandC | Any | None |
Basic Part Design Tutorial | Modeling | Beginner | Mark Stephen (Quick61) and HarryGeier | 0.17 or above | Basic Part Design for v0.17 | |
Basic Sketcher Tutorial | Sketcher | Beginner | 1:00 | Drei and Vocx | 0.19 | Basic Sketcher tutorial |
Basic TechDraw Tutorial | TechDraw Workbench | Beginner | WandererFan | 0.17 and above | Basic Part Design for v0.17 Sample Basic TechDraw Tutorial Sample | |
Code snippets | Python | Beginner | ||||
Creating a simple part with PartDesign | Modeling | Beginner | 1:00 | GlouGlou | 0.17 or above | Creating a simple PartDesign Body.FCStd |
Customize Toolbars | Beginner | 0:05 | Mario52 | Any | None | |
Draft ShapeString tutorial | Product Design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | Draft_Shapestring_Text |
Draft tutorial | Drafting | Beginner | 0:30 | Drei and vocx | 0.19 | Draft tutorial updated |
Drawing Template HowTo (obsolete) | 2D Drafting | Intermediate | 1:00 | Mark Stephen (Quick61) | 0.14.3700 or above | None |
Drawing tutorial (obsolete) | Blueprints / Drawings | Beginner | 0:15 | Drei | 0.16 or above | |
Dxf Importer Install | Intermediate | 0:05 | Mario52 | Any | None | |
Engine Block Tutorial | Part Workbench | Beginner | 1:00 | Andrewbuck40 | 0.14.3700 | |
Export to STL or OBJ | Export to STL or OBJ | Beginner | 0:20 | r-frank | 0.16.6703 | |
Extend FEM Module | M42kus | |||||
FEM Beginner tutorial | FEM Beginner tutorial | Beginner | thschrader | 0.17.11622+ | Whiffle Ball | |
FEM CalculiX Cantilever 3D | Finite Element Analysis | Beginner | 0:10 | Bernd | 0.16.6377 or above | |
FEM Shear of a Composite Block | Finite Element Analysis | Beginner/Intermediate | 0:300 | HarryvL | 0.17.12960 or above | |
FEM tutorial | Finite Element Analysis | Beginner | 0:10 | Drei | 0.16.6700 or above | |
FEM Tutorial Python | Finite Element Analysis | Intermediate | 0:30 | Bernd | 0.18.15985 or above | |
FreeCAD-Ship s60 tutorial | Ship Workbench | Beginner | ||||
FreeCAD-Ship s60 tutorial (II) | Ship Workbench | Beginner | ||||
How to install additional workbenches | Programming | Medium programmer | 0:15 | r-frank | Any | None |
How to install macros | Programming | Medium programmer | 0:15 | Mario52 | Any | None |
Import from STL or OBJ | Import from STL or OBJ | Beginner | 0:30 | r-frank | 1.0 | 0.16.6703 |
Import OpenSCAD code | Import OpenSCAD code | Beginner | 0:30 | r-frank | 0.16.6704 | None |
Import text and geometry from Inkscape | Import text and geometry from Inkscape | Beginner | 0:30 | r-frank | 0.16.6704 | |
Import/Export IFC - compiling IfcOpenShell | Arch Workbench | Advanced | 2:00 | Pablo Gil | ||
Measurement Of Angles On Holes | TechDraw Workbench | Beginner | 0:01 | AnHi | 0.19 | |
PartDesign Bearingholder Tutorial I | Product design - Bearingholder #1 | Beginner | 60 minutes | NormandC | ||
PartDesign Bearingholder Tutorial II | Product design - Bearingholder #2 | Beginner | 60 minutes | NormandC | ||
PartDesign tutorial | Sketcher | Beginner | 0:15 | Drei | 0.16 or above | |
Path Walkthrough for the Impatient | Path Workbench | Chrisb | ||||
Plot Basic tutorial | Plot Workbench Basic Tutorial | Beginner | ||||
Plot MultiAxes tutorial | Plot workbench | Intermediate | ||||
Post-Processing of FEM Results with Paraview | Post-Processing of FEM Results with ParaView | Intermediate | 2:00 | HarryvL | 0.19 | Beam and wall |
Python scripting tutorial | Programming | Intermediate | ||||
Raytracing tutorial | Raytracing | Beginner | 0:010 | Drei | 0.16 or above | |
Robot 6-Axis | Robot Workbench | Intermediate | ||||
Robot tutorial | Robot Workbench | Beginner | r-frank | |||
Scripted Parts: Ball Bearing - Part 1 | Part Scripting - Ball Bearing #1 | Beginner | 0:30 | r-frank | 0.16.6706 | |
Scripted Parts: Ball Bearing - Part 2 | Part Scripting - Ball Bearing #2 | Beginner | 0:30 | r-frank | 0.16.6706 | |
Scripts | Scripting | Beginner | onekk Carlo | 0.19 | ||
Sketcher Micro Tutorial - Constraint Practices | Sketcher | Beginner | 0:30 | Mark Stephen (Quick61) and vocx | 0.19 | Sketcher Constraints practices |
Sketcher reference | ||||||
Sketcher requirement for a sketch | Sketcher | Beginner | Maker | None | ||
Sketcher Tutorial | Sketcher | Beginner | Ulrich | |||
TechDraw pitch circle tutorial | TechDraw Workbench | Beginner | 0:10 | Andergrin | 0.19 | None |
TechDraw TemplateHowTo | TechDraw Workbench | Intermediate | 1:00 | wandererfan | 0.17 | None |
Thread for Screw Tutorial | Product design | Advanced | 1:00 | DeepSOIC, Murdic, vocx | 0.19 | Updated: Thread for screw tutorial |
Toothbrush Head Stand | Modeling | Beginner | 1:00 | EmmanuelG | 0.16 or greater | Thingiverse 2403310 |
Topological data scripting | Programming | Intermediate | ||||
Transient FEM analysis | Transient FEM analysis | |||||
Tutorial custom placing of windows and doors | Architecture | Intermediate | 1:00 | Vocx | 0.18 or above | None |
Tutorial for open windows | Architecture | Beginner | 1:00 | Vocx | 0.18 or above | None |
Tutorial FreeCAD POV ray | Rendering | Intermediate | 2:00 | Vocx | 0.18 or above | None |
Tutorial Render with Blender | Rendering | Intermediate | 1:00 | Vocx | 0.18 or above | None |
VRML Preparation for Robot Simulation | Robot Workbench | Intermediate | 0.11.4252ppa1 | |||
Washers | None | |||||
Whiffle Ball tutorial | Product design | Beginner | 0:30 | r-frank and vocx | 0.17 and above | WhiffleBall_Tutorial_FCWiki.FCStd |
Wikihouse porting tutorial | Wikihouse porting tutorial | Intermediate/Advanced | 1:00 |
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub