Sketcher RectangularArray/ro: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 40: Line 40:
* '''Colums''': The number of columns for the array.
* '''Colums''': The number of columns for the array.
* '''Rows''': The number of rows for the array.
* '''Rows''': The number of rows for the array.
* '''Equal vertical/horizontal spacing''': If the vertical distance between the array elements should be the same as the vertical distance.
* '''Equal vertical/horizontal spacing''': If the vertical distance between the array elements should be the same as the horizontal distance.
* '''Constrain inter-element separation''': When this is checked, the distance between the array elements will be constrained.</br>If you for example only know that you need a 23 x 15 mm array, use this option the be later able to change these constraints to the dimensions you need.
* '''Constrain inter-element separation''': When this is checked, the distance between the array elements will be constrained.</br>If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
* '''Clone''': ??
* '''Clone''': ??



Revision as of 08:39, 23 October 2022

Sketcher RectangularArray

Menu location
Sketch → Sketcher tools → Rectangular Array
Workbenches
Sketcher, PartDesign
Default shortcut
None
Introduced in version
0.16
See also
None

Descriere

Creează o matrice de repetabilitate a unor elemente selectate ale schiței.

Utilizare

  1. Selectați elemet(ul)ele sketcher în Tasks-Panel sau Vizualizarea 3D.
  2. Click pe sau selectați Sketch Sketcher tools RectangularArray din meniul principal.
  3. Un meniu contextual vă va întreba asupra diferitelor opțiuni ale suprafeței
  4. Selectați endpoint pentru operația în vizualizarea 3D.



Opțiuni pentru Array

Options

Rectangular array has the following options:

  • Colums: The number of columns for the array.
  • Rows: The number of rows for the array.
  • Equal vertical/horizontal spacing: If the vertical distance between the array elements should be the same as the horizontal distance.
  • Constrain inter-element separation: When this is checked, the distance between the array elements will be constrained.
    If you for example only know that you need a 23 x 15 mm array, use this option to later be able to change these constraints to the dimensions you need.
  • Clone: ??