Sketcher NewSketch/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Updating to match new version of source page)
Line 10: Line 10:
}}
}}


<div class="mw-translate-fuzzy">
{{GuiCommand/ru
{{GuiCommand/ru
|Name/ru=Создать эскиз
|Name/ru=Создать эскиз
Line 17: Line 18:
|SeeAlso=[[PartDesign_NewSketch/ru|Создать эскиз]], [[Sketcher_MapSketch/ru|Разместить эскиз на грани...]], [[Sketcher_ReorientSketch/ru|Переориентировать эскиз...]]
|SeeAlso=[[PartDesign_NewSketch/ru|Создать эскиз]], [[Sketcher_MapSketch/ru|Разместить эскиз на грани...]], [[Sketcher_ReorientSketch/ru|Переориентировать эскиз...]]
}}
}}
</div>


<span id="Description"></span>
<span id="Description"></span>
==Описание==
==Описание==


<div class="mw-translate-fuzzy">
Этот инструмент создает новый [[Sketcher_Workbench/ru|эскиз]].
Этот инструмент создает новый [[Sketcher_Workbench/ru|эскиз]].
</div>


<div class="mw-translate-fuzzy">
Обратите внимание на то, что [[Image:Workbench_PartDesign.svg|24px]] [[PartDesign_Workbench/ru|Верстак PartDesign]] имеет свой собственный инструмент [[PartDesign_NewSketch/ru|Создать эскиз]], при работе с [[PartDesign_Body/ru|телом PartDesign]] предпочтительнее использовать этот инструмент.
Обратите внимание на то, что [[Image:Workbench_PartDesign.svg|24px]] [[PartDesign_Workbench/ru|Верстак PartDesign]] имеет свой собственный инструмент [[PartDesign_NewSketch/ru|Создать эскиз]], при работе с [[PartDesign_Body/ru|телом PartDesign]] предпочтительнее использовать этот инструмент.
</div>


<span id="Usage"></span>
<span id="Usage"></span>
==Применение==
==Применение==


# If the sketch should be [[Part_EditAttachment|attached]] to existing geometry: select an object with a shape, or one or more vertices, edges, and/or faces, and/or a plane.
Если нажать на значок предварительно не выбрав грань, появится диалоговое окно с вопросом, в какой плоскости следует рисовать эскиз
# There are several ways to invoke the tool:
* XY-Плоскость
#* Press the {{Button|[[Image:Sketcher_NewSketch.svg|16px]] [[Sketcher_NewSketch|Create sketch]]}} button.
* XZ-Плоскость
#* Select the {{MenuCommand|Sketch → [[Image:Sketcher_NewSketch.svg|16px]] Create sketch}} option from the menu.
* YZ-Плоскость
# If geometry has been selected:
Вы можете задать положительное или отрицательное смещение параллельно любой из трех плоскостей.
## The '''Sketch attachment''' dialog opens.
## Select an [[Part_EditAttachment#Attachment_modes|attachment method]] from the dropdown list. Or select '''Don't attach''' to ignore the selection.
## Press the {{Button|OK}} button.
# If there is no selection, or '''Don't attach''' has been selected in the previous step:
## The '''Choose orientation''' dialog opens.
## Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
##* If the '''Reverse direction''' checkbox is not checked:
##** Top: '''XY-Plane'''
##** Front: '''XZ-Plane'''
##** Right: '''YZ-Plane'''
##* If the '''Reverse direction''' checkbox is checked:
##** Bottom: '''XY-Plane'''
##** Rear: '''XZ-Plane'''
##** Left: '''YZ-Plane'''
## Optionally change the '''Offset'''. The offset is measured along the Z, Y or X axis of the local coordinate system.
## Press the {{Button|OK}} button.
# A sketch is created.
# The sketch is put in edit mode and the [[Sketcher_Dialog|Sketcher Dialog]] opens.
# To finish edit mode see [[Sketcher_LeaveSketch|Sketcher LeaveSketch]].


==Notes==
Нажатие на значок с (предварительно выбранной) гранью приведет к тому, что эскиз будет размещен на выбранной грани.


* Existing sketches can be attached to (different) object(s) with [[Sketcher_MapSketch|Sketcher MapSketch]] or detached and reoriented with [[Sketcher_ReorientSketch|Sketcher ReorientSketch]].
<span id="Note"></span>
==Примечания==

Эскиз может быть перенесен на другую уже существующую грань, используя команду [[Sketcher_MapSketch/ru|Разместить эскиз на грани]].

Эскиз может быть перемещен в [[3D_view/ru|трёхмерном пространстве]] с помощью [[Placement/ru|Размещения]].





Revision as of 11:11, 27 March 2024

Создать эскиз

Системное название
Sketcher_NewSketch
Расположение в меню
Sketch → Создать эскиз
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Создать эскиз, Разместить эскиз на грани..., Переориентировать эскиз...

Описание

Этот инструмент создает новый эскиз.

Обратите внимание на то, что Верстак PartDesign имеет свой собственный инструмент Создать эскиз, при работе с телом PartDesign предпочтительнее использовать этот инструмент.

Применение

  1. If the sketch should be attached to existing geometry: select an object with a shape, or one or more vertices, edges, and/or faces, and/or a plane.
  2. There are several ways to invoke the tool:
    • Press the Create sketch button.
    • Select the Sketch → Create sketch option from the menu.
  3. If geometry has been selected:
    1. The Sketch attachment dialog opens.
    2. Select an attachment method from the dropdown list. Or select Don't attach to ignore the selection.
    3. Press the OK button.
  4. If there is no selection, or Don't attach has been selected in the previous step:
    1. The Choose orientation dialog opens.
    2. Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
      • If the Reverse direction checkbox is not checked:
        • Top: XY-Plane
        • Front: XZ-Plane
        • Right: YZ-Plane
      • If the Reverse direction checkbox is checked:
        • Bottom: XY-Plane
        • Rear: XZ-Plane
        • Left: YZ-Plane
    3. Optionally change the Offset. The offset is measured along the Z, Y or X axis of the local coordinate system.
    4. Press the OK button.
  5. A sketch is created.
  6. The sketch is put in edit mode and the Sketcher Dialog opens.
  7. To finish edit mode see Sketcher LeaveSketch.

Notes