Croquizador NuevoCroquis

From FreeCAD Documentation
This page is a translated version of the page Sketcher NewSketch and the translation is 45% complete.
Outdated translations are marked like this.

Croquizador Nuevo croquis

Ubicación en el Menú
Croquis → Crear croquis
Entornos de trabajo
Atajo de teclado por defecto
Introducido en versión
Ver también
DiseñoPieza Nuevo croquis, Croquizador MapearCroquis, Croquizador Reorientar


Esto creará un nuevo Croquis.

Tenga en cuenta que la Ambiente de trabajo DiseñoPiezas tiene su propia herramienta nuevo croquis, cuando se trabaja en un Cuerpo DiseñoPiezas es preferible utilizar esa herramienta.


  1. If the sketch should be attached to existing geometry: select an object with a shape, or one or more vertices, edges, and/or faces, and/or a plane.
  2. There are several ways to invoke the tool:
    • Press the Create sketch button.
    • Select the Sketch → Create sketch option from the menu.
  3. If geometry has been selected:
    1. The Sketch attachment dialog opens.
    2. Select an attachment method from the dropdown list. Or select Don't attach to ignore the selection.
    3. Press the OK button.
  4. If there is no selection, or Don't attach has been selected in the previous step:
    1. The Choose orientation dialog opens.
    2. Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
      • If the Reverse direction checkbox is not checked:
        • Top: XY-Plane
        • Front: XZ-Plane
        • Right: YZ-Plane
      • If the Reverse direction checkbox is checked:
        • Bottom: XY-Plane
        • Rear: XZ-Plane
        • Left: YZ-Plane
    3. Optionally change the Offset. The offset is measured along the Z, Y or X axis of the local coordinate system.
    4. Press the OK button.
  5. A sketch is created.
  6. The sketch is put in edit mode and the Sketcher Dialog opens.
  7. To finish edit mode see Sketcher LeaveSketch.