Sketcher CreatePoint/pt-br: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
Line 3: Line 3:
{{Docnav
{{Docnav
|[[Sketcher_StopOperation|Stop operation]]
|[[Sketcher_StopOperation|Stop operation]]
|[[Sketcher_CreatePolyline|Polyline]]
|[[Sketcher_CreateLine|Line]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Sketcher_StopOperation.svg
|IconL=Sketcher_StopOperation.svg
|IconR=Sketcher_CreateLine.svg
|IconR=Sketcher_CreatePolyline.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
}}
}}
Line 43: Line 43:
{{Docnav
{{Docnav
|[[Sketcher_StopOperation|Stop operation]]
|[[Sketcher_StopOperation|Stop operation]]
|[[Sketcher_CreatePolyline|Polyline]]
|[[Sketcher_CreateLine|Line]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Sketcher_StopOperation.svg
|IconL=Sketcher_StopOperation.svg
|IconR=Sketcher_CreateLine.svg
|IconR=Sketcher_CreatePolyline.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
}}
}}

Latest revision as of 11:02, 23 April 2024

Sketcher Point

Veja também
Sketch → Sketcher geometries → Create point
Bancadas de trabalho
Sketcher
Atalho padrão
Nenhum
Introduzido na versão
-
Veja também
Nenhum

Description

The Sketcher CreatePoint tool creates a point.

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters. introduced in version 1.0

  1. There are several ways to invoke the tool:
    • Press the Create point button.
    • Select the Sketcher → Sketcher geometries → Create point option from the menu.
    • Right-click in the 3D view and select the Create point option from the context menu.
    • Use the keyboard shortcut: G then Y.
  2. The cursor changes to a cross with the tool icon.
  3. Pick a point. Or with Pos-OVP: enter its X and/or Y coordinate.
  4. The point is created and applicable Pos-OVP based constraints are added.
  5. If the tool runs in continue mode:
    1. Optionally keep creating points.
    2. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Notes

  • version 0.21 and below: Points are always created as construction geometry. Optionally change them to normal geometry with Sketcher ToggleConstruction to make them visible outside of Sketch editing mode.