# Angulo

Constraint InternalAngle |

Veja também |
---|

Sketch → Sketcher constraints → Constrain angle |

Bancadas de trabalho |

Sketcher, PartDesign |

Atalho padrão |

A |

Introduzido na versão |

- |

Veja também |

Constraint Length, Constraint Perpendicular |

## Description

The Sketcher ConstrainAngle tool fixes the angle between two edges (lines are then treated as infinite, and open curves are virtually extended as well), the angle of a line with the horizontal axis of the sketch, or the aperture angle of a circular arc.

## Usage

See also: Drawing aids.

### Continue mode

- Make sure there is no selection.
- There are several ways to invoke the tool:
- introduced in version 1.0: If the
**Dimensioning constraints**preference is set to`Single tool`

(default): press the down arrow to the right of the button and select the**Constrain angle**option from the dropdown. - If this preference has a different value (and in version 0.21 and below): press the Constrain angle button.
- Select the
**Sketch → Sketcher constraints → Constrain angle**option from the menu. - introduced in version 1.0: Right-click in the 3D view and select the
**Dimension → Constrain angle**option from the context menu. - Use the keyboard shortcut: K then A.

- introduced in version 1.0: If the
- The cursor changes to a cross with the tool icon.
- Do one of the following:
- Select two lines.
- Select a point and two edges (in that order).
- Select an edge, a point and an edge (idem).

- If a driving dimensional constraint is created, depending on the preferences, a dialog opens to edit its value. A negative value will reverse the angle direction.
- An Angle constraint is added. If a point and two edges have been selected, up to two Point to object constraints can also be added. See Examples.
- Optionally keep creating constraints.
- To finish, right-click or press Esc, or start another geometry or constraint creation tool.

### Modo de execução única

- Do one of the following:
- Select a single line.
- Select a single circular arc.
- Select two lines.
- Select a point and two edges (in any order).

- Invoke the tool as explained above.
- Optionally edit the constraint value.
- An Angle constraint is added. If a point and two edges have been selected, up to two Point on object constraints can also be added. See Examples.

## Exemplos

### Linha única

The angle of the line with the positive X axis of the sketch is fixed.

### Single circular arc

The aperture angle of the arc is fixed.

### Between two lines

The angle between the two lines is fixed. It is not required that the lines intersect.

### Between two edges at point

The angle between the two edges at a given point is fixed. The point can be any point, e.g. the center of a circle, the endpoint of an edge, or the origin, it can belong to either or both edges, and it can also be a Point object. If required Point on object constraint(s) are added to ensure the point lies on both (extended) edges. These additional constraints are called helper constraints.

## Scripting

Angle Constraint can be created from macros and from the Python console by using the following:

```
# line slope angle
Sketch.addConstraint(Sketcher.Constraint('Angle',iline,angle))
# angular span of arc
Sketch.addConstraint(Sketcher.Constraint('Angle',iarc,angle))
# angle between lines
Sketch.addConstraint(Sketcher.Constraint('Angle',iline1,pointpos1,iline2,pointpos2,angle))
# angle-via-point (no helper constraints are added automatically when from python)
Sketch.addConstraint(Sketcher.Constraint('AngleViaPoint',icurve1,icurve2,geoidpoint,pointpos,angle))
```

where:

`Sketch`

is a sketch object`iline, iline1, iline2`

are integers specifying the lines by their ordinal numbers in`Sketch`

.`pointpos1, pointpos2`

should be 1 for start point and 2 for end point. The choice of endpoints allows to set internal angle (or external), and it affects how the constraint is drawn on the screen.`geoidpoint`

and`pointpos`

in`AngleViaPoint`

are the indexes specifying the point of intersection.`angle`

is the angle value in radians. The angle is counted between tangent vectors in counterclockwise direction. Tangent vectors are pointing from start to end for the lines (or vice versa if ending point is supplied in angle between lines mode), and along counterclockwise direction for circles, arcs and ellipses. Quantity is also accepted as an angle (e.g.`App.Units.Quantity('45 deg')`

)

The Sketcher scripting page explains the values which can be used for `iline`

, `iline1`

, `iline2`

, `pointpos1`

, `pointpos2`

, `geoidpoint`

and `pointpos`

and contains further examples on how to create constraints from Python scripts.

**General:**Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation

**Sketcher geometries:**Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry

**Sketcher constraints:****Dimensional constraints:**Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock**Geometric constraints:**Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block**Other constraints:**Refraction (Snell's law)**Constraint tools:**Toggle driving/reference constraint, Activate/deactivate constraint

**Sketcher tools:**Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints

**Sketcher B-spline tools:**Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves

**Sketcher visual:**Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space

**Additional:**Sketcher Dialog, Preferences, Sketcher scripting

**Getting started****Installation:**Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap**Basics:**About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

**Help:**Tutorials, Video tutorials**Workbenches:**Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

**Hubs:**User hub, Power users hub, Developer hub