Sketcher CreateBSpline/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "''Кривая B-сплайна построена по 4 точкам (белого цвета). На рисунке изображены контрольные многоу...")
(Created page with "==Как использовать==")
Line 20: Line 20:
''Кривая B-сплайна построена по 4 точкам (белого цвета). На рисунке изображены контрольные многоугольники зеленым цветом (прямые, соединяющие красные точки), синие круги с весами и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (4) на концах кривой относятся к множественности их узлов.''
''Кривая B-сплайна построена по 4 точкам (белого цвета). На рисунке изображены контрольные многоугольники зеленым цветом (прямые, соединяющие красные точки), синие круги с весами и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (4) на концах кривой относятся к множественности их узлов.''


==Как использовать==
==How to use==


# Press the {{KEY|[[File:Sketcher CreateBSpline.svg|24px]] '''Create B-spline'''}} button.
# Press the {{KEY|[[File:Sketcher CreateBSpline.svg|24px]] '''Create B-spline'''}} button.

Revision as of 07:08, 29 August 2019

Sketcher Нарисовать B-сплайн

Системное название
Sketcher CreateBSpline
Расположение в меню
Sketch → Геометрия эскизов → Нарисовать B-сплайн
Верстаки
Sketcher
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Sketcher Нарисовать периодический B-сплайн

Описание

This tool traces an open B-spline curve from its control points. Этот инструмент строит незамкнутую кривую B-сплайна по его контрольным точкам.

Кривая B-сплайна построена по 4 точкам (белого цвета). На рисунке изображены контрольные многоугольники зеленым цветом (прямые, соединяющие красные точки), синие круги с весами и гребень кривизны зеленым цветом. Цифра (3) в центре относится к степени B-сплайна, а цифры (4) на концах кривой относятся к множественности их узлов.

Как использовать

  1. Press the Create B-spline button.
  2. Create a series of points by clicking in the 3D view. While the command is active, the created points are connected with straight lines, and a construction circle is created centred on each point.
  3. Right-click to terminate the input and generate the curve.
  4. Depending on preferences, the tool may remain active to trace a new curve. Right-click again to exit the command.
  • It is possible to define the weight of the control points by changing the radii of the weight circles. The equality constraints on the circles need to be deleted first. The radius constraint is arbitrary, the weight of the control points will be defined by the relative radii of the circles. It works similar to gravity: the bigger a circle is in relation to the others, the more the curve will be attracted to the control point.
  • The visibility of the control polygon, the curvature comb, the degree and the knot multiplicity can be toggled on/off from the B-spline tools toolbar.
  • Check out the other tools in the B-spline tools toolbar for more B-spline editing tools.

Limitations

  • Many types of constraints are not supported at this time. Only the B-spline's control point and end points can be constrained.
  • Trimming and extend tools are not supported.
  • The shape of a B-spline curve can only be edited by dragging one of the control points. The knots lying on the curve cannot be selected.