Sketcher CreateArcOfParabola: Difference between revisions

From FreeCAD Documentation
No edit summary
No edit summary
Line 1: Line 1:
<languages/>
<languages/>
{{Page_in_progress}}
<translate>
<translate>


Line 20: Line 19:
|Shortcut={{KEY|G}} {{KEY|J}}
|Shortcut={{KEY|G}} {{KEY|J}}
|Version=0.17
|Version=0.17
|SeeAlso=[[Sketcher_CreateArcOfEllipse|Sketcher CreateArcOfEllipse]], [[Sketcher_CreateArcOfHyperbola|Sketcher CreateArcOfHyperbola]]
|SeeAlso=[[Sketcher_CreateArcOfHyperbola|Sketcher CreateArcOfHyperbola]]
}}
}}



Revision as of 09:14, 13 April 2024

Sketcher CreateArcOfParabola

Menu location
Sketch → Sketcher geometries → Create arc of parabola
Workbenches
Sketcher
Default shortcut
G J
Introduced in version
0.17
See also
Sketcher CreateArcOfHyperbola

Description

The Sketcher CreateArcOfParabola tool creates an arc of parabola.

Arc of parabola (white) with internal geometry (dark yellow)

Usage

See also: Drawing aids.

  1. There are several ways to invoke the tool:
  2. The cursor changes to a white cross with the tool icon.
  3. Pick the focus of the arc (labelled 1 in the image above).
  4. Pick the vertex of the arc (labelled 2 in the image above).
  5. Pick the start point of the arc (labelled 3 or 4 in the image above).
  6. Pick the endpoint of the arc (labelled 3 or 4 in the image above).
  7. The arc of parabola is created, including a set of internal geometry.
  8. If the tool runs in continue mode:
    1. Optionally keep creating arcs.
    2. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Notes