Sketcher CreateArcOfHyperbola: Difference between revisions

From FreeCAD Documentation
(Updating WIP)
No edit summary
Line 20: Line 20:
|Shortcut={{KEY|G}} {{KEY|H}}
|Shortcut={{KEY|G}} {{KEY|H}}
|Version=0.17
|Version=0.17
|SeeAlso=[[Sketcher_CreateArcOfEllipse|Sketcher Arc of Ellipse]], [[Sketcher_CreateArcOfParabola|Sketcher Arc of Parabola]]
|SeeAlso=[[Sketcher_CreateArcOfEllipse|Sketcher CreateArcOfEllipse]], [[Sketcher_CreateArcOfParabola|Sketcher CreateArcOfParabola]]
}}
}}



Revision as of 11:40, 16 February 2024

This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher CreateArcOfHyperbola

Menu location
Sketch → Sketcher geometries → Create arc of hyperbola
Workbenches
Sketcher
Default shortcut
G H
Introduced in version
0.17
See also
Sketcher CreateArcOfEllipse, Sketcher CreateArcOfParabola

Description

The Sketcher CreateArcOfHyperbola tool creates an arc of hyperbola.

Usage

See also: Drawing aids.

  1. There are several ways to invoke the tool:
  2. The cursor changes to a white cross with the tool icon.
  3. Pick the center of the major radius of the arc of hyperbola (labelled 1 in the image above).
  4. Pick the tip of the arc (labelled 2 in the image above), this also defines its major radius.
  5. Move the cursor away from the previous points and pick the start point of the arc (labelled 3 in the image above), this also defines its curvature.
  6. Pick the endpoint of the arc (labelled 4 in the image above).
  7. The arc of hyperbola is created, including a set of internal geometry.
  8. Optionally deleted one or more elements of this internal geometry. They can be recreated at any time with Sketcher RestoreInternalAlignmentGeometry.