Sketcher ConstrainDistance/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "==Применение==")
Line 23: Line 23:
[[Image:Sketcher_ConstrainDistance_example.png]]
[[Image:Sketcher_ConstrainDistance_example.png]]


==Применение==
==Usage==


# Pick two points or one line or one point and one line.
# Pick two points or one line or one point and one line.

Revision as of 19:35, 11 September 2021

Ограничить расстояние

Системное название
Sketcher_ConstrainDistance
Расположение в меню
Sketch → Ограничения эскиза → Ограничить расстояние
Верстаки
Sketcher
Быстрые клавиши
Shift + D
Представлено в версии
-
См. также
Ограничение расстояния по горизонтали, Ограничение расстояния по вертикали

Description

Constrain distance constrains the length of a line, the perpendicular distance between a point and a line or the distance between two points to have a specified value.

Применение

  1. Pick two points or one line or one point and one line.
  2. Invoke the command several ways:
    • Press the Constrain distance button in the Sketcher toolbar.
    • Use the Shift + D keyboard shortcut. (D is for Distance)
    • Use the Sketch → Sketcher constraints → Constrain distance entry from the top menu.
  3. A pop up dialog opens to edit or confirm the value. Press OK to validate.

Note: the constraint tool can also be started with no prior selection. To set the perpendicular distance between a point and a line, the point needs to be selected first. By default the command will be in continue mode to create new constraints; press the right mouse button or Esc once to quit the command.

Hint

If applicable please consider using the Horizontal distance or Vertical distance constraints instead. These constraints are more robust and faster to calculate than the ConstrainDistance tool.

Scripting

Distance from origin:

Sketch.addConstraint(Sketcher.Constraint('DistanceX', Edge, PointOfEdge, App.Units.Quantity('123.0 mm')))

Distance between two vertices:

Sketch.addConstraint(Sketcher.Constraint('Distance', Edge1, PointOfEdge1, Edge2, PointOfEdge2, App.Units.Quantity('123.0 mm')))

Length of line (the GUI allows selecting the edge itself, but it is just a shorthand for using the two extremities of the same line:

Sketch.addConstraint(Sketcher.Constraint('Distance', Line, 1, Line, 2, App.Units.Quantity('123.0 mm')))

Distance from point (Edge, PointOfEdge) to nearest point on line (Line):

Sketch.addConstraint(Sketcher.Constraint('Distance', Edge, PointOfEdge, Line, App.Units.Quantity('123.0 mm')))

The Sketcher scripting page explains the values which can be used for Edge1, Edge2, Edge, PointOfEdge1, PointOfEdge2, PointOfEdge and Line, and contains further examples on how to create constraints from Python scripts.