Sketcher BSplinePoleWeight

From FreeCAD Documentation
Revision as of 08:39, 18 April 2024 by Roy 043 (talk | contribs) (Removed the "Weight explanation" paragraph. Does not belong here.)
This documentation is a work in progress. Please don't mark it as translatable since it will change in the next hours and days.

Sketcher BSplinePoleWeight

Menu location
Sketch → Sketcher visual → Show/hide B-spline information layer → Show/hide B-spline control point weight
Workbenches
Sketcher
Default shortcut
None
Introduced in version
0.19
See also
Sketcher CreateBSpline

Description

The Sketcher BSplinePoleWeight tool shows or hides the B-spline control point weight in all sketches. See below for an explanation about weights.

The numbers (green, in square brackets) refer to the weights of the control points.

Usage

  1. There are several ways to invoke the tool:
    • Press the Show/hide B-spline control point weight button.
    • Select the Sketch → Sketcher visual → Show/hide B-spline information layer → Show/hide B-spline control point weight option from the menu.

Changing weights

How to change weights is described on this page.