Part Sphere/ru: Difference between revisions
No edit summary |
(Created page with "== Описание == Создаёт простую параметрическую сферу с параметрами положение (position), угол1(angle1), уг...") |
||
Line 17: | Line 17: | ||
}} |
}} |
||
== |
== Описание == |
||
Создаёт простую параметрическую сферу с параметрами положение (position), угол1(angle1), угол2(angle2), угол3(angle3) и радиус(radius). |
|||
[[File:SimpleSphere.jpg|400px]] |
[[File:SimpleSphere.jpg|400px]] |
Revision as of 16:01, 23 April 2021
Сфера |
Системное название |
---|
Part Sphere |
Расположение в меню |
Деталь → Примитивы → Сфера |
Верстаки |
Модуль Part |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Создать примитивы |
Описание
Создаёт простую параметрическую сферу с параметрами положение (position), угол1(angle1), угол2(angle2), угол3(angle3) и радиус(radius).
Usage
- Switch to the Part Workbench
- There are several ways to invoke the command:
Result: The sphere will be positioned at origin (point 0,0,0) on creation. The angle parameters permit to make a portion of sphere instead of a full sphere (they are set to 360° by default).
Options
The parametric sphere is defined by the following parameters:
- Radius
- Angle 1
- Angle 2
- Angle 3
- as well as the standard set of placement parameters
The picture below gives an overview of a parametric sphere with parameters different from the default value.
Parameter
- ДанныеRadius: Radius of the sphere
- ДанныеAngle 1: 1nd angle to cut / define the sphere
- ДанныеAngle 2: 2nd angle to cut / define the sphere
- ДанныеAngle 3: 3rd angle to cut / define the sphere
Because it is quite difficult to explain the meaning of the parameters angle 1, angle 2, angle 3, the picture below gives an explanation about these parameters with following values: angle 1 = -45°, angle 2 = 45° and angle 3= 90°.
Part
- Примитивы: Куб(Параллелограмм), Конус, Цилиндр, Сфера, Тор, Полый цилиндр,Примитивы, Связующие формы
- Создание и правка: Выдавливание, Построение фигуры вращения, Отражение, Скругление, Фаска, Создать плоскость из граней, Ruled Surface, Профиль, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Создать полый объект, Projection on surface, Прикрепление
- Булевы операции: Соединить, Разорвать связь, Compound Filter, Булевы операции, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Измерительные: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework