Эллипс

From FreeCAD Documentation
Revision as of 08:28, 3 May 2021 by AMK (talk | contribs) (Created page with "Эта команда создаёт эллиптическое изогнутое ребро. При значениях по умолчанию эллиптическое р...")

This documentation is not finished. Please help and contribute documentation.

GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.

See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.

Эллипс

Системное название
Part Ellipse
Расположение в меню
Деталь → Создать примитивы... → Эллипс
Верстаки
Part(Деталь), OpenSCAD
Быстрые клавиши
Нет
Представлено в версии
-
См. также
..

Описание

Эта команда создаёт эллиптическое изогнутое ребро. При значениях по умолчанию эллиптическое ребро будет замкнутым и, следовательно, будет эллипсом. Если свойства Угол(Angle)1 или Угол(Angle)2 отличаются от значений по умолчанию (0 и 360), ребро будет открытой кривой.

Usage

The Create Primitives dialogue can be accessed via the Primitives icon located in the Part menu or the Part toolbar, in the Part Workbench.


Properties

  • Major radius: the major radius of the ellipse, the default value is 4
  • Minor radius: the minor radius of the ellipse, the default value is 2
  • Angle 1: start of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 2: end of the edge of the ellipse or elliptical curved edge, (degrees anti-clockwise), the default value is 360