Окружность

From FreeCAD Documentation
Revision as of 08:23, 2 May 2021 by AMK (talk | contribs)

Окружность

Системное название
Part Circle
Расположение в меню
Деталь → Создать примитивы... → Окружность
Верстаки
Part
Быстрые клавиши
Нет
Представлено в версии
-
См. также
Нет

Описание

Эта команда создаёт ребро в форме круга. При значениях по умолчанию круговое изогнутое ребро будет замкнутым и, следовательно, будет кругом. Если свойства Угол0 или Угол1 изменить от их значений по умолчанию (0 и 360), ребро будет открытой кривой, то есть дугой.

Alternatively a Part Circle can be initially defined from three points. Once created the circle will only contain the standard Part Circle properties and will no longer contain a reference to the creation points.

Usage

A Circle geometric primitive is available from the Create Primitives dialogue in the Part workbench.

  1. Switch to the Part
  2. There are several ways to access the Create Primitives dialogue:

Properties

  • Radius: the radius of the curved edge (arc or circle)
  • Angle 0: start of the curved edge, (degrees anti-clockwise), the default value is 0
  • Angle 1: end of the curved edge, (degrees anti-clockwise), the default value is 360